http://www.airsoftsociety.com/forums/ General discussion forum about building, modifying and repairing airsoft guns. en Wed, 08 Sep 2010 17:08:23 GMT vBulletin 60 http://www.airsoftsociety.com/forums/images/misc/rss.jpg http://www.airsoftsociety.com/forums/ http://www.airsoftsociety.com/forums/f10/g36-common-problem-hop-up-15216/ Wed, 08 Sep 2010 02:11:18 GMT Dear all G36 users, I was wondering if you ever had this problem (Its the first time I encountered something like this); To put the inner... Dear all G36 users,

I was wondering if you ever had this problem (Its the first time I encountered something like this);

To put the inner barrel and hop up unit back into the gun, you have to push them into the mock gas chamber and turn it 90 degrees for it to lock.

Now, has anyone had the same problem as me, whereas the inner barrel and hop up chamber twisted differently, such that the hop-up nub opening on the barrel is very mis-aligned with the chamber, thereby having the pushed down part of the hop up sleeve misaligning? ]]> Chiba_Kanzaki http://www.airsoftsociety.com/forums/f10/g36-common-problem-hop-up-15216/ http://www.airsoftsociety.com/forums/f10/upgrade-input-pls-15210/ Tue, 07 Sep 2010 19:42:56 GMT hey everyone, so i am new to the airsoft forum thing but would love some input please. i am going to be doing some upgrades to my gun and just wanted... hey everyone, so i am new to the airsoft forum thing but would love some input please. i am going to be doing some upgrades to my gun and just wanted a word from the wise.

i currently have an A&K licensed masada with a madbull tbb and systema hop up. next i was going to throw in the systema mecha-box m150 with systema motor with gaurder pinion and wired to deans. i do however want to downgrade the spring to possibly an m95 or m100 so i can use it at cqb feilds, but am afraid the spring wont be "strong" enough and i might get misfead/double feed. i was also leaning more towards running a 9.6 mini instead of an 11.1 lipoly in fear of the above reason. any suggestions on how i can reduce the fps even a little would be greatly appreciated. also any other recommended upgrades would be very helpful. thank you for your contributions in advance. ]]> l3gendinyourmind http://www.airsoftsociety.com/forums/f10/upgrade-input-pls-15210/ http://www.airsoftsociety.com/forums/f10/im-screwed-15201/ Tue, 07 Sep 2010 12:37:50 GMT I need help with putting back on the slide catch for the TM desert warrior 4.3. I can do it fine without the slide, but with the slide, I can't do it. ]]> perthy25 http://www.airsoftsociety.com/forums/f10/im-screwed-15201/ http://www.airsoftsociety.com/forums/f10/dmr-gearbox-15192/ Tue, 07 Sep 2010 06:22:59 GMT whats the diffrence in an elogated v.2 like the sr-25 and a v.2 bore up. im making a semi only dmr and was woundering how much of a diffrence there... whats the diffrence in an elogated v.2 like the sr-25 and a v.2 bore up. im making a semi only dmr and was woundering how much of a diffrence there is. it will have a 650mm 6.02in tbb in it. ]]> aries35 http://www.airsoftsociety.com/forums/f10/dmr-gearbox-15192/ http://www.airsoftsociety.com/forums/f10/we-gbb-scar-compatibility-15188/ Tue, 07 Sep 2010 05:10:00 GMT I may get one, but do they have their own unique hop up unit and barrel, or could I put in a standard AEG bucking, nub, and Tightbore barrel? Since... I may get one, but do they have their own unique hop up unit and barrel, or could I put in a standard AEG bucking, nub, and Tightbore barrel? Since I'd only have 30 shots per reload, I'd like for every one to count. ]]> Josey Wales http://www.airsoftsociety.com/forums/f10/we-gbb-scar-compatibility-15188/ http://www.airsoftsociety.com/forums/f10/m16-stag-15-handguard-15183/ Tue, 07 Sep 2010 01:43:29 GMT could you buy a 4 inch RIS rail, put it on the delta ring, and then use another delta ring and attach an M4 handguard on the front half? could you buy a 4 inch RIS rail, put it on the delta ring, and then use another delta ring and attach an M4 handguard on the front half? ]]> schueller http://www.airsoftsociety.com/forums/f10/m16-stag-15-handguard-15183/ http://www.airsoftsociety.com/forums/f10/ca-sr25-overheating-lipo-not-shooting-8-4-volt-help-15176/ Mon, 06 Sep 2010 23:57:51 GMT Well I have a used CA SR25 I bought. Only upgrade from previous owner was a Prometheus Tight Bore barrel. It originally came with a 11.1v LiPo, but... Well I have a used CA SR25 I bought. Only upgrade from previous owner was a Prometheus Tight Bore barrel. It originally came with a 11.1v LiPo, but the motor and battery kept heating to dangerous levels whenever I used it (it was fully charged, BTW). I then bought an adaptor, and started using an 8.4 volt mini type I had. It shot just fine the first 25 shots, but then it stopped shooting, but I could feel the motor "thud" whenever I let go of the trigger. I took the motor out of the grip, and still attached to the gun, it runs just fine. However, when I reattach it to the grip and gear box, it does the same low thud. I took off the adaptor, and tried the lipo in there again, and it shot, but did the overheating deal again. I'm pretty stumped at this point, since I've ran a lot of things through google and can't find anyone with a similar problem. So I'm thinking one of two things: a) buy a 9.6 volt battery, or b) something to do with the shims?
Thanks for any help. ]]> Josey Wales http://www.airsoftsociety.com/forums/f10/ca-sr25-overheating-lipo-not-shooting-8-4-volt-help-15176/ http://www.airsoftsociety.com/forums/f10/m249-gearbox-15167/ Mon, 06 Sep 2010 19:23:59 GMT Just wanted to know what version gearbox an M249 uses, this is for a friend, I have no intention of getting an m249 Just wanted to know what version gearbox an M249 uses, this is for a friend, I have no intention of getting an m249 ]]> JAMEZAW9 http://www.airsoftsociety.com/forums/f10/m249-gearbox-15167/ http://www.airsoftsociety.com/forums/f10/airsoft-gi-g4a3dmr-question-15160/ Mon, 06 Sep 2010 16:33:58 GMT Just got one and the gun is nice but i have a wobbly front sight. Looks like a jbu flip up iron sight or something. i had removed a set screw from... Just got one and the gun is nice but i have a wobbly front sight. Looks like a jbu flip up iron sight or something. i had removed a set screw from underneath but it still wont come off. i use a red dot optic so i would like to either remove or tighten the iron sight, preferably remove. Any help appreciated. ]]> vwjoegolf http://www.airsoftsociety.com/forums/f10/airsoft-gi-g4a3dmr-question-15160/ http://www.airsoftsociety.com/forums/f10/aug-speed-15156/ Mon, 06 Sep 2010 12:56:14 GMT I purchased a JG Steyer Aug that is supposed to shoot 450 fps. , but bairly shoots 250 w/ .20. I had the barrel & hop up rubber piece replaced & it did nothing. Any help? thanks ]]> SeniorBeaver http://www.airsoftsociety.com/forums/f10/aug-speed-15156/ http://www.airsoftsociety.com/forums/f10/g36c-silencer-15151/ Mon, 06 Sep 2010 02:27:34 GMT Hey guys, now is the time to upgrade the barrel in my new jg g36c and need a new silencer to cover it. My madbull halo silencer will not fit, so i am... Hey guys, now is the time to upgrade the barrel in my new jg g36c and need a new silencer to cover it. My madbull halo silencer will not fit, so i am looking to get a new one. here are a couple that i am looking at. It only needs to be 6 inches and able to fit on the g36c.

1-Evike.com - Accessories | Evike.com - Mock Silencer | Evike.com - Matrix 14mm Light Weight Airsoft Mock Silencer / Barrel Extension - 30 X 190mm (Zombie Killer) |

2-Evike.com - Accessories | Evike.com - Mock Silencer | Evike.com - Matrix "Special Force" Airsoft Barrel Extension / Mock Silencer 35mm x 155mm. (14mm- & 14mm+) |

I know a quick detach silencer like this 3--Evike.com - Accessories | Evike.com - Mock Silencer | Evike.com - ICS QUICK DETATCH M4 MOCK SUPRESSOR EXTENDED EXTERNAL BARREL | will fit, but i would rather have a silencer that screws onto the threads (option 1 and 2). Will any -14mm silencer fit? I am worried that it might hit the front of the handguard and not screw on all the way. thanks!!!! ]]> mollylover45 http://www.airsoftsociety.com/forums/f10/g36c-silencer-15151/ http://www.airsoftsociety.com/forums/f10/new-barrel-less-fps-15149/ Sun, 05 Sep 2010 23:55:09 GMT Alright so I baught a new barrel for my M4. I got a madbull 6.03 455mm barrel for my gun. When I chronoed it before the new barrel I was shooting... Alright so I baught a new barrel for my M4. I got a madbull 6.03 455mm barrel for my gun. When I chronoed it before the new barrel I was shooting 315fps now with the new barrel Im at around 295. Can any one explain maybe why ? because I thought it was supposed to increase it not decrease it.

Also If I got a more powerfull spring for my gun would I have to upgrade anything else along with it or would I be fine to just put a new spring in

And one last thing, My gun keeps shooting to the left and I cant figure out why, no matter what way I adjust the hop up it still curves to the left. It did this before the new barrel and after. Any reason for this because it gets pretty annoying lol. Its not a really bad curve but its pretty annoying none the less ]]> 703 http://www.airsoftsociety.com/forums/f10/new-barrel-less-fps-15149/ http://www.airsoftsociety.com/forums/f10/p90-problem-15148/ Sun, 05 Sep 2010 22:32:34 GMT been having burst of low fps followed by high fps. it's not that big of a deal but it is kinda annoying. here is the video
--------------------------------------------------------------------
http://www.youtube.com/watch?v=QaQIN0Gn6ek
--------------------------------------------------------------------

here is the list of upgrades i have done/attempted

installed a 6.03 tbb
new hop-up housing by E1 (old one was clearly not echo 1 and was to small and such)
G&P bucking
echo 1 h-space nub

all front end.
as stated in the video. i think it is something to do with the air nozzle as it looks chipped but i'm not completely sure. ]]> reedfe http://www.airsoftsociety.com/forums/f10/p90-problem-15148/ http://www.airsoftsociety.com/forums/f10/please-help-we-1911-questions-15146/ Sun, 05 Sep 2010 21:29:37 GMT hey guys i'm kinda freaking out. Ok so yesterday i bought a WE 1911 with an extra mag, and some gas. So when i got home i shot off maybe 2 clips, and just went to bed. This morning i went to shoot it, and when i was just about to load the mag in, i noticed that i looked like the area where u put the mag in had already startedto wear away and the metal is showing. Is this normal???:eek::eek::eek: I was also wondering if it is safe to leave the mag in the gun, while the guns in its case? Last question, what happens if you leave gas in the mag?

ok thanks guys please respond because i dont know if i should return it or whatt ]]> acerules13 http://www.airsoftsociety.com/forums/f10/please-help-we-1911-questions-15146/ http://www.airsoftsociety.com/forums/f10/0-cylinder-15140/ Sun, 05 Sep 2010 19:41:31 GMT Can anyone estimate a fps and rps difference between a 3/4 hole cylinder and a 0 cylinder hole? Can anyone estimate a fps and rps difference between a 3/4 hole cylinder and a 0 cylinder hole? ]]> JAMEZAW9 http://www.airsoftsociety.com/forums/f10/0-cylinder-15140/