Separate names with a comma.
So Titan, 14:1DSG. SHS tappet plate cut to 8mm. 4 coils cut from tappet spring. Maxx nozzle 21.25mm. When I was building this DSG I had bumps...
Testing this idea I had for AOE correction. Normally the piston head sits it the hole of piston to center it. When washers are used it can be hard...
I have many Gate Titans. I think they are great, never had any problems. Its to a point where I don't want to buy a new gun unless I can fit one...
So working on this DSG... Gate Titan, 16:1 SHS 8 tooth, Tienly GT-25000, 11.1v 2200mAh 50c, modify S150. With .25bbs I'm at 360FPS consistently....
So, first DSG build. I'm learning as I go here. It sounded great, fed great so far(only had 17RPS because of wrong battery, slow motor, strong...
I've built tons of SSG guns, 18:1, 12:1, 13:1........ Going to build a DSG, mostly for something to do and fun. Never had any troubles out of the...
Hey, my friend gave me some guns to work on for him. One of them is a Lancer Tactical polymer gun, EBB. It is front wired had the fake mag acting...
So I bought a Hi-capa TM brand. Spent like 600$ on parts to build it. Metal slide, Metal barrel, All Cow Cow internals. The nozzle is the only...
Finally got the new EPM1 mags in. Was super excited..... until I tried to put bbs in them. I got 3 because that was the limit I could buy. All of...
Anyone make a 22ish tpa motor 18-25k motor that has screws to hold the brush springs on? I would like a different way to connect motor in my grip....
I'm using a 22k 22TPA motor on 12:1 SS 3 teeth with Gate Titan. I only use Semi-Auto and build around trigger response. I have a second gun with...
When shooting, 1 out of 20 shots or so drops about 6-12 inches at about 50 feet range. I changed hop up chambers, it has done it on all of them. I...
Hello, I have gate titan in my AEG. M110 spring 13:1 gears and 22TPA 22k motor. Dont know if that is relevant or not. Question is, When I set...
So I recently put a gate titan in my Dytac b15 SLR Helix that I got dirt cheap. Pretty good externals on the gun. Internals are crap. I was...
Okay, I'm fed up with this whole hi capa thing. I'm so deep in money with it feel like I cant turn back now. Parts list is as follows. TM 5.1,...
So I've been researching cylinder volume in relation to barrel volume. Saw one person say 1.8/1 is his "sweet spot". He did some science stuff...
So I have VFC Avalon, short one, 100% stock. Well I changed the bucking to a Maple Leaf 70. Stock barrel. I'm not sure what diameter the stock one...
So, my first gun I ordered (Arcturus full metal M4) is broken. I could not help myself and I let all the magic fairies out. What really happened...
Hey folks My KJW hammer broke so i bought a ZCI steel one. Put it back together works with WE mag but the kjw wont fire. Sometimes i can fire the...
Okay... I'm building a Hi-Capa, not because I want "the best gun bro" I'm doing it to learn about them. The knowledge is invaluable to me. So save...
