Separate names with a comma.
Yea, I cant find a Spectre anywhere. They got the new Mk3 now. Was thinking of using one in a build soon, if I can get/find one.
DSG. When on pre-cock, spamming semi, I will get some random double cycles. Does not do it with pre-cock off. Gate Titan only has one pre-cock...
What length ?
So the picture shown is the exact point which the piston is released. As you can see the next tappet pick up is too close to the SHS tappet. The...
They are all stamped V2 on bottom
Modifications to the piston head gained me 60% of FPS loss in auto. Was still looking for the other 40%. I cut 6 SHS tappet plates to all the...
After even further testing, I have some more results. In the vacuum test on the modified Prometheus piston head, I reduced the suction by 60% by...
So I opened the holes on my Prometheus piston head. Gained 40-50FPS in auto. I'm now at 280ish FPS with .25s before I was 200ish FPS. When I...
No, They are Maxx Model Full cylinders. They are not deep scratches. It looks bad but when you touch, it feels minor. Cant tell anything with...
Also what would be the most likely cause of scratching the cylinder? The very end of the cylinder has wear on it. The piston head does not...
After further testing, I noticed while doing the tissue test, the tissue got sucked in the hop up on full auto. Guess I have some suction. Not...
Gearbox is Retro Arms, Tried two barrel/hop setups. VFC-250mm and Maxx-290mm, same result with both. 35RPS and under is fine.
Yea I did, when I screwed the grip to the gearbox inside the lower, the receiver could still move
At 25-35 RPS the FPS is stable at 320ish. Anything above 38 RPS really starts to drop. I will never use 40+ RPS, but it just bothers me knowing...
