Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 68 Results
  1. General Airsoft Discussion
    So I wanted to put in the NI-MH2/3A1100mAh 8.4v battery into my Cyma.028-S what I bought one year ago, I didn't used that much, but it functioned perfect, putting the battery in was always a difficult thing, I putted in today, but while I was trying to position it, the little green "hat" at the...
  2. General Accessory Discussion
    Our daily use of mobile phones, power banks, and even electric vehicles are inseparable from a battery, which is 11.1v 3s lipo battery 2200mah, but who would have thought that the 11.1v 3s lipo battery 2200mah, which is closely related to our lives, would become our side "Little Bomb"! So what...
  3. Parts and Accessories Classifieds
    6s lipo batteries are often used in On-Road RC Cars & Trucks or Racing Boats because they have powerful motors, such as Traxxas Sledge, E-Revo / VXL, XO-1, Unlimited Desert Racer/UDR,Miss Geico dual motor boat,etc. Even some ducted machines will need them, such as E-flite Avios, Super Sport...
    $96 USD
  4. Electric Guns
    Last Tuesday, I bought a collection of five AEGs from a friend of a friend for $300. These were good-quality guns, at least three Tokyo Maruis among them. Two of them I was able to test successfully, but one I couldn't test because the wiring was removed with the intent of rerouting the wires...
  5. General Accessory Discussion
    So, I recently got my G&P M16A1 back from the local paintball/airsoft shop, and I was excited to use it last weekend. Unfortunately, the battery I bought for it had to be returned because not only could it not be charged, but it wouldn't even cycle the action. I just want a good, reliable...
  6. Gun Building, Modifications & Repairs
    I’ve installed a Perun V2 hybrid into my cyma platinum MP5. Everything works fine until I plug the motor in. Occasionally I get a couple shots off and then the mosfet stops detecting that the motor is connected. What’s weird is that when I increase the motor height by a huge amount, sometimes...
  7. General Accessory Discussion
    OK, so I noticed that Evike's section on Lipo batteries also had Li-Ion batteries. I put an 11.1v Li-Ion in my King Arms Thompson M1928, and thus far, I have noticed no issues with it. I do wonder, though: are there any significant differences or advantages between Lipo or Li-Ion batteries when...
  8. Airsoft Guns for Sale
    Hi y'all. I'm interested in giving away my LCT AK74 because I'm a little bit more interested in the GHK series. I bought this AK earlier this year and it works well with the intended 7.4V Lipo small tamiya. LCT also offers the fixed stocked receiver if you wanted an 11.1V lipo or mosfet...
  9. Gun Building, Modifications & Repairs
    Hey Guys, I have an issue so I thought I could find someone here that has more experience and possibly help me find a solution :) So.. I have a fairly modified ARP9 - I changed a lot of stuff - SHS "light" ( blue ) piston, silent piston and cylinder heads, 6,03 barrel, new steel bushings, 110...
  10. Gun Building, Modifications & Repairs
    I recently bought the MK-II from Evike and I plan on switching out the stock to the VFC QRS (Avalon) stock and switching to deans. I am trying to put the Titan Power 11.1v 3000mAh 16C Stick Type Li-Ion Battery in there(I think it fits).The gun page said "(NOTE: Battery output rating should not...
  11. Gun Building, Modifications & Repairs
    Hey everyone! I hope you're doing fine during these weird times. To the matter: I bought four used LiPo batteries about a year ago, without knowing much about LiPos. I put them on my shelf for future use. They have now been laying there fully charged for a really loong time. I now know more...
  12. General Accessory Discussion
    I have just been trying to find an on-line copy of the manual for the Nuprol SM-4 charger. It's no longer available on the Nuprol web site, but I came across a link about a safety recall from September last year...
  13. Gun Building, Modifications & Repairs
    hello everyone, I have a stock kwa m16a3 (known as the kwa km16br). I run a 9.6 5000 mah battery, can I upgrade to a 10.8 without getting a mosfet or other upgrades? Thanks!
  14. Site Help and Suggestions
    Hi all, I recently got my hands on a Lancer Interceptor generation 2. I'm currently running a 9.6 volt NIMH battery in it. My friend has a G&G M4, and he is running almost the exact same battery. We both have Full Metal Gear boxes, and we are wondering if we can upgrade to 11.1 volt batteries...
  15. Beginners Forum
    So, recently I decided to order parts for my gun, just external stuff didn't want to mess with anything on the inside of the gun. I bought a new pistol grip for my cqb m4 and after switching it out the gun didn't work. After watching a video I realized I put the wires in the wrong spot after...
  16. Electric Guns
    I found this for what seems like a ridiculously good price from a US seller. https://www.ebay.com/itm/Li-Po-Battery-7-4V-2200mAh-25C-2S-For-RC-Quadcopter-Airplane-Helicopter-R2D2/282920604874 Prewired to deans too, so that saves a bit of time.
  17. Gun Building, Modifications & Repairs
    I've been adding upgrades to my G&G GR15 Raider to improve trigger response and power. After putting the gearbox together (motor, trigger, lower receiver, etc.) and hooking it up to a 9.6v NiMH battery, the wires get really hot after 60-90 consecutive shots on semi. They seem to get hottest at...
  18. Airsoft Guns for Sale
    Great starter set up. Comes with 5 mid-cap mags, each one holds about 100 round. Comes with a huge 9.6 volt 3600 mah battery that fits snuggly in the butt stock. Will last you all day no problem. Also comes with a nice vest made by Tag Airsoft. The charging handle on the gun is broke but can...
  19. Beginners Forum
    Hello all! Very happy to be a newcomer to a wonderful community. I have long played airsoft as a kid, doing small skirmishes in friends' backyards, and I have occasionally paintballed in outdoor field games. I'm looking to get into airsoft, and was looking to spend around 300-350 dollars on a...
  20. Electric Guns
    Ok so, I'm the Juggernaut for my team, and I've been looking at ways to improve my role. I recently looked into purchasing an LMG to go with the current suit, but I didn't like the fact that I'd need to carry more batteries on me, plus it'd be a pain to have to try and swap them out while...
1-20 of 68 Results
Top