Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. General Airsoft Discussion
    Hi. I'm wondering what are the effects of different combinations for packing and nub hardness if: Nub is harder vs packing Nub is softer vs packing Nub is same shore with packing I'm planning to use it on an AEG with a drop in rhop/flat hop like MR Hop. I have a 60 deg flat nub and unicorn hop...
  2. Gun Building, Modifications & Repairs
    Greetings! Thanks before hand for your help and answers. I want to use maple leaf MR.HOP bucking on my AEG. I changed the hopup chamber for a MAXX M4 ME hop chamber. Currently the rifle is hitting around 410-415 fps, but Im planning on lower that to 390-400 due to field limits. My questions...
  3. Gun Building, Modifications & Repairs
    Yes I know the Masada A&K needs some adjusting. This gun had some Ok accuracy. It was about 320fps using 25s- stock m120 spring. Once I changed the three parts, it was very low - 100fps. I bout a Wii tech nozzle, wii tech tappet plate, and AOLS piston head which is about the same width and...
  4. Gun Building, Modifications & Repairs
    Because this gun is new and people are still getting there hands on them, I don't know if the upgrades suggested by evike are appropriate. Hence I am looking for second opinions from the forum. Not to discredit them, just looking for more opinions. The gun is the new p90 with a spring of 400...
  5. Gas Powered Guns
    Just about every KWA/KSC gun I've owned has, at one point or another, swelled the bucking with silicone oil. It's a nice, lightweight oil that plays nice with just about every part in a gun except the buckings they use. The problem is that the swelling creates very bad performance and doesn't...
  6. Gun Building, Modifications & Repairs
    Hello friends I'm having a dilemma on upgrading my KWA aeg. It's a great gun straight out of the box but, I want more consistency and a bit more range. The problem I have found is KWA does not seem to be aftermarket parts friendly, mainly with the hop up unit and I believe air nozzle. I am going...
  7. Beginners Forum
    Hello, this is my first post. I have found many answers in these forums especially for teching my JG AUG but i cannot find a similar thread to this. I recently ordered a new ML bucking with its own ML nub and a 420fps spring. So I thought since the spring is around 420fps that i should get the...
  8. General Airsoft Discussion
    So, I want to flat hop my single shot shotgun. Where would I find something like that? Are they the same as a normal bucking?
  9. Gun Building, Modifications & Repairs
    Question for all you who swear by maple leafs (leaves?o_O) : If I have an AEG I want to try out maple leaf bucking on, is there any benefit to going with the method which requires me to file the bridge off my prommy barrel? Is there any benefit to using the VSR bridgeless version instead of the...
  10. Gun Building, Modifications & Repairs
    So I got an Elite Force 1911 Tac for Christmas I'm having some issues with the hopup. It's stuck at full no matter which position the hopup adjustment dial is in. It would probably be easy to fix if I could just remove the inner barrel/hopup. However, there is a small pin preventing those from...
  11. Gun Building, Modifications & Repairs
    So I came across some issues today when installing a new barrel and hopup bucking. When I slid the Hopup unit over the bucking, it was an incredibly tight fit (yes I lubed it). The only way I could get it on was by stretching the bucking a little. I had to cut some of it with a razor blade so I...
  12. Sold/Expired Classifieds
    I'm selling a bunch of barely used stuff that I don't need. Shipping is not included. If you buy everything, it will only be $120.00 plus shipping. Comment or message me with questions or orders. Picture 1: Custom Upgraded Gearbox - $63.00 - Classic Army shell - brass bushings on the spur and...
  13. Gun Building, Modifications & Repairs
    So I have been having problems with my SR-10 it's shooting of to the left. I did buy it used but it was working fine when I first got it. Then one day it just starting shooting off to the left. So I have bought some new part (Motor, Spring, bucking) Just to replace some parts I already planned...
1-13 of 13 Results
Top