Search Results for ‘compression’

Comparison between poor-sealing stock mag rubbers and better fitting 9-Ball rubbers. Gun is a KJW hicapa. Using an adapter for compressor air, with stock seals the pistol requires over 100 PSI to fully cycle the slide back to lock. With the replacement seals, it does the same at 70 PSI...

Ive been working on a g&p m14 and when I go to test it, its shooting 1j with .32s on a m135. I have perfect air compression and nozzle to bucking. I checked, trust me, I'm not new to teching. I opened up the gearbox again and put a different m135 spring in it and I'm still getting similar...

Hey operators, I've been working on a DSG for a loacl guy for the last month and I just can't get a compression issue figured out. Gun in a DBOY's body with a G&G gearbox. Barrel is 247mm and the cylinder is ported alittle under 3/5th. It's shooting 305-320 fps, but will drop to 280 on full...

Hey guys. I just bought an upgraded jg bar 10 off the forums here. It has complete Action Army upgrades. Out of the shipped box it fired a little hot for my area at around 560 fps with a m150. Also it was hopping to the right unless I leaned the gun about 30 degrees to the left. I opened it up...

This is airsoft gold. A gift from 1Tonne to all the techs out there. For a long time now techs in the airsoft community have been asking what the perfect barrel length is that gives the most energy for a given bb weight. Some advantages of this are that your gearbox will be under less stress as...

I started a build and I got parts and stuff put together. I attempted a bevel-to-pinion shim job, but I don't know how well I did because of this problem with the selector switch. When I switch to semi, it is locked. When I switch to full then to semi, it shoots on full-auto. Another problem I...