Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 29 Results
  1. Gun Building, Modifications & Repairs
    Help! This it’s my first Dsg! I knew before I started that I would encounter problems but I can’t find a fix for this one. My tappet plate is getting chewed up by my sector gear. Does anyone know a fix for this?
  2. UTG Sport Model 4

    ~2008 UTG Sport Model 4 reconfigured for CQB. This particular one has a 4" tubular handguard with a recessed TM tracer unit that's been modified to hold a UVT 106 2.0 in the front with a open chamber in the back. Currently DSG, all Lonex Maxx etc.
  3. UTG Sport CQB

    ~2009 UTG Sport Model 4 'Combat Commando' reconfigured for CQB. This one has a 4" quad rail from a KWA SR5. Currently DSG, all Lonex Maxx etc.
  4. Gun Building, Modifications & Repairs
    Hello all. I'm having issues with my DSG build where the piston seems to be half reciprocating on the first trigger pull, and then cycling twice on the second pull. With the gearbox open, the sector gear seems to be picking up the teeth of the piston just fine so I'm at my wit's end as to...
  5. What Gun Should I Get?
    Hey guys! New on the forum :) Heard that there is some serious knowledge here. Looking for a new rifle to bring too both the outdoor and indoor events. So basically a middle point between close combat at carbine style/length. My budget is around 1500-2000$ Platform is m4 Performance goals is...
  6. Gun Building, Modifications & Repairs
    Hey! My motor just burnt up and I've been wanting to do a DSG for quite a while. Decided that this would be as good a time as any to do a it. I am hoping to get 40-65 rps @ 350-400 fps with 11.1v [edit: inner barrel is a bit over 240mm and is 6.03mm in diameter] [4/12/22 update: Parts on the...
  7. What Gun Should I Get?
    HEY guys what would i need to make this gun into a DSG i will do these upgrades in june but if the upgrades are not needed or i am to get different upgrades or more upgrades then please tell me what i will need, what i dont need, and what i should change. my gun is a base gun now i have done no...
  8. General Airsoft Discussion
    So I decided to build myself a DSG because I never got to build one before and only have built some nice 30 rps builds. The problem I'm having is somehow it's still over spinning and I have no idea why. The nozzle is fully pulled back which is also causing a low fps problem as well. Anyone got...
  9. Gun Building, Modifications & Repairs
    Hey guys, Doing a DSG build and here are parts I am thinking about: Goal for the build: Mainly indoor player but sometimes outdoor. I want to be able to swap the spring and seamlessly change fields/fps limits. My main goal is to get the best possible trigger response. I don't care much about...
  10. Gun Building, Modifications & Repairs
    Base gun is a KWA TK.45C SE I bought on release. Converted to a DSG in November of 2019 with these parts: Siegetek 14:1 9-tooth dsg set ASG 22TPA motor (moved to 28TPA in June of 2020) SHS 14.5T lightened piston (with extra teeth removed) Lonex POM piston head (w/o bearings) - Important note...
  11. Introductions
    I've been playing airsoft for a couple years with my teenage boys. My ICS-CXP-MMR-SBR with a Titan ECS and Madbull 6.01mm barrel has worked like a champ. Looking to put my engineering skills to use and build a DSG that will dominate the battlefield as well as put the ghostbuster (P*) guns to...
  12. Gun Building, Modifications & Repairs
    Hey operators, I've been working on a DSG for a loacl guy for the last month and I just can't get a compression issue figured out. Gun in a DBOY's body with a G&G gearbox. Barrel is 247mm and the cylinder is ported alittle under 3/5th. It's shooting 305-320 fps, but will drop to 280 on full...
  13. Gun Building, Modifications & Repairs
    My friend wants to turn his krytac into a beast. I was thinking a Gate titan, siegetek dsg, an asg 28 tpa, and r-hop/general hop up tuning. Any suggestions for parts or mods? He has a budget of about 600$
  14. Gun Building, Modifications & Repairs
    So I've finally got all of the parts for my dsg. I started with a 7.4v that was barely charged. I got roughly 25 rps. It fed fine after I cut the tappet spring down. It all fed fine all the way up to 35 rps. as soon as i used a fully charged 7.4, the gun does not feed. semi is fine but full auto...
  15. Gun Building, Modifications & Repairs
    So I have a dsg build with 10 to 1 gears and it runs at 109 rps unloaded(with out a piston and spring) or that’s what my Titan says and I am wondering what spring I need for it not to hit pme.
  16. Gun Building, Modifications & Repairs
    So the problem is once i put the gearbox it the lower and the upper and insert all the pins: safe works great, semi works great, auto when u pull the trigger it goes back slightly and when u apply some pressure it snaps back (as if you were on safety and then suddenly it gives) and does not...
  17. Gun Building, Modifications & Repairs
    So this was my first airsoft build; actually it was the first time I even opened the gearbox and I decided to challenge myself with building a quality dsg, heres my parts list. A&k LR300 upper, lower and barrel. A&k v2 gearbox M160 spring SHS lightened 15 steel tooth piston. (Also swiss cheesed...
  18. Gun Building, Modifications & Repairs
    I have seen these dual sector gear builds shooting 60+ RPS easily and was wondering how hard it is to build one. Do i just pop in the DSG and im done or are there other modifications>
  19. Gun Building, Modifications & Repairs
    Hey just got myself a G&G p90 looking to upgrade it i have done high speed builds in the past on version 2/3 but this is my first time on a p90 V6 i was going to Dsg this and wanted to know what gear set to buy. Siegetek make a version 6 set and a version 3 set but a lot of people say p90's use...
  20. Sold/Expired Classifieds
    -Btc spectre MKI -siegetek dsg 10.44:1 gearset -guarder compression system -lonex shell tappet and springs zci screws -retro arms trigger -lonex motor contacts -shs piston cut down to like 7 or 8 teeth -guarder mushroom piston head -modify bearings and Lonex steel bushings and several...
1-20 of 29 Results