Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 42 Results
  1. Gun Building, Modifications & Repairs
    I have got two elite force mp5s and both seem to have the same problem. I'll play with both about 1.5 to 2 hours in semi auto fine, then the trigger will stop resetting back to be able to fire again. I have to tap the back of the trigger to get it to spring forward, but the trigger works fine...
  2. Parts and Accessories Classifieds
    The Airsoft Twist Lock Baseplate is specifically designed to fit the Elite Force Glock 17 magazine, making it easy to access the magazine's intake valve without the need to disassemble the entire magazine. To access the valve, simply pull out the pin, twist the bottom part, and pull it out. Once...
    $25 USD
  3. Airsoft Guns for Sale
    Looking at selling a few of my airsoft guns for gun money. This will be the first listing. This Glock is probably about 4 ish years old at this point. Everything is still working, just has some minor cosmetic wear. If you'd like me to send you a shooting vid, I can provide. Price as shown/OBO...
    $300 USD
  4. Airsoft Guns for Sale
    EF G17 Gen5 with 1 greengas mag. Everything works but you have to manually adjust the hop with the slide off due a small cracked piece on the hop unit not allowing it to be adjusted via allen key while slide is attached. With a new hop unit its just like new again. 1/1 scale fits real holsters.
    $100 USD
  5. Gun Building, Modifications & Repairs
    I have a discontinued Elite Force G36kv in tan and I am deciding to fix it. The V3 gearbox is fried, and I am looking for a drop-in replacement, but I am currently stuck. The KV uses ARES internals and I have found a replacement V3 gearbox with the E.F.C.S. but noticed the wiring is on the...
  6. Airsoft Guns for Sale
    Selling my custom Glock 17 gen 4. ($400) Used only a few times. Perfect condition. - Slide: Pro Arms Mk. 1 slide (tan) - Threaded Elite Force Barrel - 6mm Pro Shop Trigger (tan) - Pro arms mag well (black) - Ace tech Lighter BT tracer unite (tan) - Super bright easy flip on light attachment - 1...
  7. Airsoft Guns for Sale
    Trying to get rid of an elite force tar-21 wired to deans, barely used, everything working, no missing parts. I highly prefer trades, hit me up with anything! Hoping for $130 shipped with usps priority mail on paypal. I also have brand new shs 13:1 gears and shs high torque motor that I can...
  8. Gas Powered Guns
    So this month, I bought a Umarex/Elite Force S&W Model 29 with 8 3/8" barrel, and I got to fire it today, and it was fun, not to mention it seemed as though I could get several cylinders per CO2 capsule. I do, however, have one question about it: do any speedloaders exist for this gun? I tried...
  9. Airsoft Guns for Sale
    Glock 45 (g45) with Pro Arms Threaded Barrel and cytac hardshell holster Similar to the 19x as it has a g19 upper with a g17 frame. Magazine plate is missing as it cracked. Asking 165 obo, 20 for usps flat rate shipping
  10. Gun Building, Modifications & Repairs
    Anybody ever upgrade one of these? This is my primary and I'm looking for any advice on what to upgrade to get even more out of this already well-built gun. I'm thinking of upgrading the inner barrel and possibly lengthening the outer barrel (saw a replacement on Evike). I'm just not sure...
  11. General Airsoft Discussion
    The thought just came to mind that I am unable to find information/a total breakdown of the Elite Force CTAR line of guns. So I am wondering if all of you might think me making/posting videos and explanations of the breakdown of the gun might be helpful/useful. Especially if that specific gun...
  12. Gun Building, Modifications & Repairs
    So, story goes: I spoke to someone on Hopup about buying their used Matrix Godzilla 5000 High Torque motor. Well, a little bit of haggling ($38 shipped) and a week later, it's at my doorstep. So today I took the motor out of my Elite Force CTAR Tavor and swapped it with the new Godzilla motor...
  13. Gun Building, Modifications & Repairs
    So for some backstory, I have been working on customizing my EF CTAR by adding the ARES Tavor barrel to a new body since the previous CTAR body I had, had a broken barrel holder. After a bit of sanding and cutting, I was able to make the ARES Tavor Barrel work (differences between the ARES...
  14. Airsoft Guns for Sale
    NOT WILLING TO TRADE Selling my entire collection of used airsoft parts/accessories. Most of the stuff has not been used much, if at all, in an actual game; it's more likely to have been used in a plinking environment. Just selling all of this stuff because I would like to get out of airsoft to...
  15. Wanted
    Hey all, I'm looking for one final Glock 19 gas magazine to complete my setup. If anyone has one too many green gas Glock 19 mags burning a hole in your pocket, sell it to me for $30 lol. Must be undamaged and non-leaking. Also only interested in the actual Elite Force model and it has to be...
  16. Parts and Accessories Classifieds
    Hello everyone! I recently finished designing and testing a silencer adapter for the Elite Force H8R Revolver. It works, and it looks clean. It is a simple drop-in replacement for the original flash hider. The adapter is printed in black PLA, and it has 14mm CCW threads. I can also print...
  17. What Gun Should I Get?
    I wasn’t looking to buy a new AEG but saw the MP7 AEG in person (the non AEP version) made by VFC. Tempted to buy but heard a handful of people have had issues with them. Is this worth getting / what has your experience been? I’d like to get a sense for how reliable they are so I know what to...
  18. Airsoft Guns for Sale
    I have a ef 1911 and i would like to sell it and the mag, an extended magazine, and hard holster for 110 USD Will post pics if you are interested
  19. Parts and Accessories Classifieds
    Hi I've got 2 elite force mags for the 1911 asking 50$ free ship ebay: https://www.ebay.com/itm/392407254257?ul_noapp=true#rwid
1-20 of 42 Results
Top