Search Results for ‘feeding’

Hello, new member here. I have some experience now with V2 gearboxes, but I'm still learning and I'm a bit unsure when it comes to troubleshooting issues. I have never encountered this problem before, and I could really use some help on this one But here goes, I have a G&G Firehawk, It's almost...

So I've finally got all of the parts for my dsg. I started with a 7.4v that was barely charged. I got roughly 25 rps. It fed fine after I cut the tappet spring down. It all fed fine all the way up to 35 rps. as soon as i used a fully charged 7.4, the gun does not feed. semi is fine but full auto...

Hi guys, I have an issue on my SL-8. For those that don't know, it's a g36 variant. I have replaced all the internals with after market parts and I'm having feeding issues on full auto. I have installed, Guarder bore-up kit( nozzle to piston head) SHS full steel tooth ploy piston Seigetek...

So very new to the fourms but figured this would be the best place to get answers for this question. Anyway I'm getting back into the sport after quite a while So please excuse me for my current lack of knowledge. But would like an upgrade from my current AEG (a CYMA AK47 contractor) so far I've...

Recently I picked up this: http://www.evike.com/products/60925/ Now, the mag release was sticky so I did put some oil on it, but that's really the only modification I did. (The oil kinda seeped and made the bolt release stop working). I've tried it with 6mmproshop midcaps and the included...

Ok my old Crossman Pulse R76 (yes I know its a walmart gun) has always worked very well and still looks new. Recently the magazine broke and I just got a new one. Now it still wont fire. However, if I drop a BB down the barrel and then pull the trigger the BB gets shot out like normal. Also...

Another problem with my ICS G33. With the help of you guys on the forum, I replaced a damaged cylinder about a year ago and the G33 has been working great ever since.... Until now. All of a sudden when I was out on the field, the gun started dry firing, only actually expelling a bb every ten...

I just got a G&G Combat machine, it's stock and I don't plan on uprading it anytime soon. Wich mags do you recomend for it? The MAG brand 130 round magazines or the elite force 140 round magazines? I've read good and bad things about both and I'm kinda on the fence of wich to get. Thanks in...

The problem is clear. The cylinder head is not retracting at the end of a cycle. It will stick out about 5 millimeters into the feeding tube coming from the magazine. The gun is older, and has some wear. What is the problem? Thanks!

Hello fellow airsofters, I sent in my gun to Evike with them sending it back claiming it was fixed, not to mention they lost or stole my alan wrench thing for the hk416 mag winder. So, I got my gun back, went to shoot it and found out it would shoot BB's at random intervals, so it is some kind...

Okay... so, my brother's AK is having some issues. The gun fires as usual, but the gun will not feed. I have tried taking some bbs and placing them -in- the feeding hole thingy (technical terms, yah?). I'm no airsmith, but from what I can tell something isn't being drawn back enough to let bbs...