Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. Gun Building, Modifications & Repairs
    Hairline cracks on sides of rail of a used CA P90 The Red Dot Module housing was damaged too... Clean off some paint to see the crack better. It was recommended to also carve the crack some to get a better fill. Clean, add flux, heat the part to ~350, and add solder. Sandblasted the...
  2. Gun Building, Modifications & Repairs
    This is the gun i'm talking about in this thread. --> https://www.airsoftgi.com/product/AGM-MP031-M4A1-Carbine-AEG-Airsoft-Rifle-Black-4539/ I bought this gun from a friend who was leaving airsoft and it shot fine, used it for a few games. Then I put it into storage and when I pulled it out and...
  3. Gun Building, Modifications & Repairs
    Hi all, First post on this site. I bought an F2000 back in January as i always liked the gun (Second to the AN-94, sadly not in airsoft form) but have only just got to use it for the first time yesterday after a never ending sea of delays caused by having to have the gun's spring changed as it...
  4. Gas Powered Guns
    Hi all, I'm new to the airsoft arena, but am loving it none the less. For the moment, I am using airsoft as a training aid, and I will say it is very effective, except for one thing... My CCW is a Walther PPQ M2, as is my airsoft pistol. It is a GBB, and I love it, but one day it decided that...
  5. General Airsoft Discussion
    I️ got a bolt-action sniper rifle about two years ago, and recently hav started having a problem where I️ would pull the bolt back, it would get stuck, and I’d have to push hard on it to get it back, which would fire the bb I️t had just chambered. I️ do not have a link to the gun, as I️ bought...
  6. General Airsoft Discussion
    So I was playing today and I guess i wound my mag too hard and it broke. It is my only mag, and I would like to fix it without purchasing a new one. I have the exact same problem as this guy does around the 1:50 mark. Does anyone have experience with this type of mag failure, and if so, is...
  7. Electric Guns
    Ok my old Crossman Pulse R76 (yes I know its a walmart gun) has always worked very well and still looks new. Recently the magazine broke and I just got a new one. Now it still wont fire. However, if I drop a BB down the barrel and then pull the trigger the BB gets shot out like normal. Also...
  8. Gun Building, Modifications & Repairs
    So my M4 was shooting fine put it up for about a month took it back out (no the spring wasn't under tension and it wouldn't shoot. The motor worked fine so I took apart the whole gearbox and found no problems so I put the whole rifle back together. I ended up just having to loosen the screw...
  9. Gun Building, Modifications & Repairs
    Hey guys I recently kind of... fried my battery on my smart charger and I need to replace it. What would you say would be the cheapest but most effective replacement battery I could get. Should I go lipo? I am using an Golden Eagle M4CQB. The battery doesn't need to fit in the stock I already...
  10. Gun Building, Modifications & Repairs
    I bought a CO2-powered 2.5-in WinGun BlackOps revolver new on EBay for about $40. When it arrived, the orange cap was cracked inside of the packaging, implying that it had been dropped or stepped on. When I brought it to the field for testing, I saw that each BB (I tried 0.12, 0.20, and 0.32...
  11. Sniper Rifles
    I just got my Well mb 02, and when I cock it, it doesn't click, and wont fire. Is this just a small fix, or do i have to send it in?
  12. Gun Building, Modifications & Repairs
    The sling hold on my m14 is broken. Is there any way to replace it??
1-12 of 12 Results
Top