Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Gun Building, Modifications & Repairs
    Current Build: SHS 18:1 DSG (8tooth) G&G 18:1 Bevel & Spur SHS swiss cheese piston (teeth cut off, 3rd tooth lightly shaved down, AOE corrected) Lonex POM Piston Head (bearings removed, spring guide has them) Lonex Full cylinder Lonex Cylinder Head (one with the pads at the front of the gearbox)...
  2. Gun Building, Modifications & Repairs
    I am currently working on building my first DSG and was curious if anyone else has run into this weird issue or can explain why what's happening. I have almost identical fps on semi with a 168mm 6.01, 275mm 6.03, 325mm 6.01, and with a 416mm 6.03, all at around 360-375 fps (.20s) Current Build...
  3. Gas Powered Guns
    Following on from my posts where the BBs were curving strongly to the right, due to a folded-over lip on the hop rubber, which I resolved with a new one, I've now got a different issue... The velocity is very inconsistent, varying by +-10fps... so a total variation of 20fps over just a few...
1-3 of 3 Results