Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 20 Results
  1. Gun Building, Modifications & Repairs
    Ok so it doesnt seem to matter whatever i try, but whenever shooting in semi, and sometimes on full auto, the gears takes an extra half cycle leaving the nozzle retracted which then happens to let 2 BB's into the chamber. Ive tried different gears, pistons, springs, motors, tappet plates. Should...
  2. Gun Building, Modifications & Repairs
    Alright let's figure this out haha. I just bought a lonex A1 titan motor, rated at 40k high speed and high torque. I wanna build off that to upgrade my gearbox. I've never upgraded a gearbox, I just want a reliable and well performing setup. So, what are your recommendations for everything. I'll...
  3. General Airsoft Discussion
    I will be relocating for a new job and I need to get rid of all my airsoft gun and gears because I just never had time anymore to use them. For the most part they were only used for 1 game and it's been sitting around, no issues, like new conditions. Full metal m4, hard case, vest, etc. All...
  4. Airsoft Guns for Sale
    $400 for EVERYTHING you see in here Nothing wrong with any of them, they've only been used once. I just couldn't manage/find any more time to go out and use them so I just decided to sell them. KJW Full Metal M4 GBB (This is rare find, I've only used it in the field once and it has been unused...
  5. Gun Building, Modifications & Repairs
    So, i am quite new to the hobby, and bought a used AK105 rifle with a lot of modifications. The problem now is that it is a high speed DSG build, with some feeding problems as well. First all specs of the rifle: - SHS Dual Sector gear, low gearing ( 20/1) - 1.2J on a SHS M150 fjeder. - ASG...
  6. Gun Building, Modifications & Repairs
    The gun that you have: VFC HK416A5 Your Budget: I'm honestly going at this with an open wallet, but perhaps no more than $400? Your Goals: Rate of fire: Aiming for around 22~24 rps. Gun currently fires around 19 rps on full auto. Velocity (FPS): Operation between <330 FPS w/ 0.2's (~1.0j...
  7. Parts and Accessories Classifieds
    As the title states, I have a systema helical gear set for sale. Originally purchased to do a high power AEG build but went another route (ie sold the gun lol). This set was installed in a gear box and literally only turned over three times. All parts shown are included....ie the systema gears...
  8. Gun Building, Modifications & Repairs
    So last thanksgiving I got it into my head that my A&K M249 needed some upgrades. My thinking was "It's a beast stock, imagine what it'll do with some upgrades!" The upgrades were extensive and expensive (see list below for the parts I added). I didn't do the work myself, I'm not experienced at...
  9. Articles
    I'm wondering how to set up gears and motor properly for different setups
  10. Wanted
    Hey, i am looking for some gears for a systema gearbox as well as a motor. I just picked up a ptw and its missing the gears and im told the motor could be bad. I'd like to trade if possible or partial, i have a lil bit of everything from gear to over 100 guns from all categories, as well as...
  11. Gun Building, Modifications & Repairs
    I'm currently working on a high fps setup and obviously need better gears, I looked around for some time and now I want to know are Prometheus gears really worth it or is it better to go with a cheaper variant like SHS or Guarder? (the gears should be able to withstand M190 springs and higher)
  12. Gun Building, Modifications & Repairs
    Just bought a VFC Avalon CQB VR16 from Airsoft Station. super nice gun, was working great and had no issues IN MY FIRST GAME EVER USING IT...but my SECOND game it crapped out on me. broke a bunch of teeth on my gears using full auto (not heavily at all) with a 9.6 battery. took out my motor and...
  13. Gun Building, Modifications & Repairs
    I've made my first attempt at upgrading my G&G GR15 raider to have better trigger time. For the sake of this post, here are the relevant parts: SHS 13:1 gears | Magic Box 30K High Torque motor (Long-axis) | Modify 8mm ceramic ball bearing bushings | Modify shims | All other parts are stock...
  14. Gun Building, Modifications & Repairs
    Hey guys so I recently got 13:1 SHS gears for my VFC VR 16. I had shimmed it and felt like it needed to be re-shimmed again after testing it. So I shimmed to the best of my abilities but it still makes a slight grind noise. I isolated the problem to the spur and sector gear. I decided to pull...
  15. Gun Building, Modifications & Repairs
    My m249 PARA I bought used has been having trouble ever since I bought it. It was intermittently locking for the last two months, but one day the motor burned out. It has been consistently locking up since I installed a Prometheus m120 spring, a G&P m120 high-speed motor, and a new trigger...
  16. Gun Building, Modifications & Repairs
    Hey guys wondering if zci gears will be strong enough for my dsg. Im going to be using the shs dsg and a m160 spring. Thanks :D
  17. General Airsoft Discussion
    Hi I am rewiring my M4 to the stock (it was originally wired to the hand guard), and was having trouble (I think) with the tappet plate I have everything hooked up correctly Im pretty sure, the tappet plate is up against the bevel gear and is bending back every rotation of the gears... I am...
  18. Gun Building, Modifications & Repairs
    I bought a A&K SVD Aeg Christmas 2014. I bought a nice Li-Po for it, as it's a real power hog and the stock battery was crap. But, everything else is stock. I believe the gears are cheap plastic, and I am pretty sure they stripped clean. :mad: The gun, when "Activated" (as the word "fired" does...
  19. Sold/Expired Classifieds
    Rules: -Paypal only -Shipping not included -I will ship USPS using whatever method is cheapest. You pay any extras, such as insurance. -Reasonable offers will be considered -If you have any questions, or need more pictures, just ask. -Serious buyers only -No Trades. The Goods: (1) Siegetek...
  20. Gun Building, Modifications & Repairs
    Hey guys, So I'm shimming this gun currently and I just cant seem to get it sound how i want it. I've been using the Bevel to Pinion method so I've set the motor height using the half shell method and now I'm trying to get the up and down movement of the gear right. So my questions are: 1 -...
1-20 of 20 Results
Top