Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

21-40 of 46 Results
  1. Airsoft Guns for Sale
    Bought a few years back, but have since sent it back to KWA for newer internals. Has a polymer body, iron sights, and a foldable stock. Not a gas gun--electrically powered. Gun is in good condition. Original price was around $330. Asking price is $185. Email: [email protected] if...
  2. Electric Guns
    I purchased my first airsoft rifle around June. It was the G&G CM16 Raider L. It works fine except the hop up doesn't really change anything about the BB flight trajectory. It literally stays the same no matter how I change it. It doesn't go up at all, all it does is dip after about 20 feet. The...
  3. General Airsoft Discussion
    Airsoft AEG Upgrade I am new to airsoft and I need help choosing a upgraded hop up and inner barrel for range on my Lancer Tactical LT-14A M4 15" Keymod AEG. I'm not sure what size will fit this gun,and the best hop up and inner barrel for this gun. Please help
  4. Gun Building, Modifications & Repairs
    New owner of an A&K Mk46 here. I have a couple questions for the forum: 1. I purchased a Bullgear hop up unit for it. It seems that the unit is just a tad too big to fit into the outer barrel assembly. I've seen some posts from people saying that they Dremeled or sanded to make it fit. Just...
  5. Gas Powered Guns
    Big picture: Im from Brazil, here we have very low standard for what a good gun should perform and a very thin selection of guns and aftermarket pieces to choose from. Importing full guns and optics (acogs, red dots, etc) are felonies. Anyway, guns like the Ares Amoeba Honey Badger are...
  6. Gun Building, Modifications & Repairs
    Hey, I just got a WE gas blow back scar and started to shoot it but the BB went down really quickly. So, I adjusted the hop up all the way up and the BB still just kept going down. I can't seem to fix this so does anyone know how to? Thanks in advance.
  7. Gun Building, Modifications & Repairs
    So I got an Elite Force 1911 Tac for Christmas I'm having some issues with the hopup. It's stuck at full no matter which position the hopup adjustment dial is in. It would probably be easy to fix if I could just remove the inner barrel/hopup. However, there is a small pin preventing those from...
  8. Gun Building, Modifications & Repairs
    So I just received 4 new MAG Brand midcaps and somehow they are making my gun downhop. The mag works fine at 1st, but after I shoot a full auto burst, the bbs begin to downhop. Does it have something to do with the strength of the springs in the mags?
  9. Gas Powered Guns
    I was so lucky to get my hands on a 'copy' of the Maruzen PPK/S. The quality is amazing and so on, but a review will wait for a later day. What my problem is that when I get half-way through a magazine, it just starts to like "turn up" the hop-up. At the last two BB's, it won't even make it to...
  10. Gun Building, Modifications & Repairs
    Hi! I have a very strange feeding prob. when i put my high cap everything is fine but when i use my mid and fill it over 70 bbs, it spits the bbs or the gun jams. i tried marui bucking and green gng. Also i tried the original barrel and hop up and the same. My friends gun have the same prob and...
  11. Beginners Forum
    Hello, again. This is to help me and hopefully other players. My hop up right now goes like this : .............................................========= ............................................/....................\...
  12. Gun Building, Modifications & Repairs
    Hey all, So I've had my JG SOPMOD M4 for a few weeks now, played with it, and now want to upgrade it. I've heard all over that replacing the hop up and adding a tight bore barrel are the best first mods you can do (especially for a JG M4) but I got a little confused once I started getting...
  13. Gun Building, Modifications & Repairs
    I was taking the lower off my ARX 160 competition and i forgot to take the barrel off. The hop up is broken just after where the BB enters, and i dont know where i can get a new one. Anyone know where i can get just the hop up system without the barrel?
  14. Electric Guns
    Good day guys , I'm new around here ... so don't freak out if I'm screwing around.. : I've just bought a Jing Gong AKS-74 EBB , and it has this problem ... It seems like it has something to do with the hop up. First of all nothing literally happens when I adjust it , If I disable it nothing...
  15. Gun Building, Modifications & Repairs
    New to the forum, I know I know, search, read and all that. Got a few quesrions. I bought my first gun and will be running it this weekend. I'm naturally into tinkering and modifying. I bought the discoverline Steyr AUG A2. It's has a version 2 gear box and rated at only 295 fps. I would like to...
  16. Beginners Forum
    Hi, Im currently Picking parts out for a DMR build I'm hoping I'm going to be able to do in the near future. I wanted a unique look to the rifle so I have been looking at the socom 47 receivers on evike http://www.evike.com/products/44597 and I wanted a internally silenced look and I thought a...
  17. Gun Building, Modifications & Repairs
    First, I turned the bucking inside out and shaved off ridge and bump. Then, I fit and installed an m nub on the modified arm. I then installed my bucking and assembled the hop up. I am getting 0 hop, and the bucking won't go into the barrel. I also made an extension for my m nub but I still get...
  18. Gun Building, Modifications & Repairs
    I recently purchased a KWA KR5 from a local business in Jacksonville Florida. The gun works amazingly except for two issues that I found recently, the gun isn't very accurate (which I suppose is probably the hop up bucking since when I cleaned the crap out of the bucking with my cleaning rod and...
  19. Beginners Forum
    Ok, i´m pretty new to airsoft. Just got my sniper a week ago ( brand new ) and watched already many sniping tutorials. I have an: Upgraded Well L96 (Black). BUT i have one problem: The sniper isnt really accurate, i tried to shoot a target when i was about 10m away and still could not hit it...
  20. Gun Building, Modifications & Repairs
    Hey, So I bought a WE Tech MSK in black. It shoots well, crisp and hard recoil, easy maintenance, however I have been having issues with the hop up. - I haven't broken it in fully yet, but I can get a flat trajectory. - The problem is: On the first shot after a break, the BB will go about 40...
21-40 of 46 Results
Top