Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 25 Results
  1. Gun Building, Modifications & Repairs
    Greetings! Thanks before hand for your help and answers. I want to use maple leaf MR.HOP bucking on my AEG. I changed the hopup chamber for a MAXX M4 ME hop chamber. Currently the rifle is hitting around 410-415 fps, but Im planning on lower that to 390-400 due to field limits. My questions...
  2. Gun Building, Modifications & Repairs
    Yes I know the Masada A&K needs some adjusting. This gun had some Ok accuracy. It was about 320fps using 25s- stock m120 spring. Once I changed the three parts, it was very low - 100fps. I bout a Wii tech nozzle, wii tech tappet plate, and AOLS piston head which is about the same width and...
  3. Gun Building, Modifications & Repairs
    So for some backstory, I have been working on customizing my EF CTAR by adding the ARES Tavor barrel to a new body since the previous CTAR body I had, had a broken barrel holder. After a bit of sanding and cutting, I was able to make the ARES Tavor Barrel work (differences between the ARES...
  4. General Airsoft Discussion
    So my tar-21 has this problem where on full auto, every consecutive shot curves up after the first shot (over hopping). However, on semi-auto, this problem is absent. I have tried cleaning the barrel and lubing the hop up chamber and the lubing does help for a short while but it goes right...
  5. Gun Building, Modifications & Repairs
    I'm in the process of fixing up a boneyard Echo 1 SCAR I got for cheap and wondering if anyone knows about hopup compatibility. I tried a Madbull Ultimate per a suggestion from an old Reddit thread, but the nozzle won't reach all the way and create a good seal. Would a SCAR H nozzle maybe fix...
  6. Gun Building, Modifications & Repairs
    Story: -Hey, I was adjusting the hop up one day and dialed it too much breaking the arm in the hop up unit, problem is its not a standard hop up. Question: -So does anyone know what hop up units I could replace it with? Info: -It is a rotary hop up -I have tried A JG AUG hop up unit hoping...
  7. Gun Building, Modifications & Repairs
    A Guide to Constructing and Installing a Current Regulated Airsoft Tracer The purpose of this guide is to walk the reader through the construction and operation of using a current regulator to drive UV LED's for use in airsoft tracers. I will also discuss the use of different color LED's and...
  8. Gun Building, Modifications & Repairs
    I've been modifying my gun to improve trigger response. Despite all my efforts, the FPS has gone from 350 to 270, with an and that's with an M110 spring. I've tried stretching the O-ring (either by leaving it over the cylinder or by using a lighter) wrapping Teflon tape around the cylinder head...
  9. Gun Building, Modifications & Repairs
    I'm upgrading my G&G CM16 Raider L and will buy a Prometheus 6.03 tight bore barrel. I've heard that hop ups made by G&G are pretty good, and I was wondering if I changed my hop up to a Prometheus hop up unit specifically made for G&G guns, would it improve range? I might also change the bucking...
  10. Airsoft Guns for Sale
    I have a like new KWA LM4 from the keymod series, this one has the 9 inch km rail and a 10.5 inch barrel. All externals are stock plus a Magpul AFG and a no name mock suppressor. Internal upgrades are maple leaf Evo 2 hopup assembly, and a slightly longer 6.05 mm inner barrel, covered by the...
  11. MP7 barrel & hopup

    Stock accuracy parts from my Well MP7. Flat hop'd bucking S-hop'd barrel Shimmed hop arm Sorbo nub Sealed with floss & teflon
  12. Gun Building, Modifications & Repairs
    Hi guys, i have a Umarex UMP 45 Competition. Unfortunately, i broke the Hop up and the bracket that connect it to the outer barrel. I tried 3 different G36 hop up without success, they seems just a little to short to catch the bb. Umarex support was useless and doesn't stock the parts...
  13. Electric Guns
    I purchased my first airsoft rifle around June. It was the G&G CM16 Raider L. It works fine except the hop up doesn't really change anything about the BB flight trajectory. It literally stays the same no matter how I change it. It doesn't go up at all, all it does is dip after about 20 feet. The...
  14. Gun Building, Modifications & Repairs
    I have an off-brand M4 made by Matrix/E&C that got discontinued on evike. But it is a great gun and out of the box fast, strong and accurate. After about four games my HopUp Nub didn't seem to be able to adjust so my HopUp didn't adjust as a whole. So I've been doing research and came across...
  15. Gun Building, Modifications & Repairs
    I was going to post this in my WIP thread, but wasn't sure if enough people would see it. So I posted this in the 1Q1A teching thread, but then as @Sitting_Duck said, it should get its own thread. This is what I posted in the 1Q1A teching thread: As some of you may know, I have a boneyard WE...
  16. Gun Building, Modifications & Repairs
    I'm sorry if this is a repost but I couldn't seem to find a thread with this issue. My friend and I recently installed the prowin hop up into our AEG's and occasionally our mags wont fit (these are mags that have always fit in our guns prior to the upgrade) After trying a few select mags and...
  17. Sold/Expired Classifieds
    Hi, I am selling a A&K M249 gearbox that has light use as I dropped a FE in my 249. Then a Bullgear hop up unit and also selling prommy purple bucking and prommy flat nub. Prices are $55 for the gearbox, $45 for the bullgear and $25 for the bucking set up. You can contact me at (941)567-7090 or...
  18. Sold/Expired Classifieds
    Hello, ACQUIRED - I am looking to buy a complete hopup unit for a version 2 gearbox. It must be compatible with G&P/TM patterned M4 AEGs. I am looking for a quick and cheap fix (nothing too fancy) but I will consider all offers, provided the price is right. - ACQUIRED Also, I am looking to...
  19. Gun Building, Modifications & Repairs
    So I came across some issues today when installing a new barrel and hopup bucking. When I slid the Hopup unit over the bucking, it was an incredibly tight fit (yes I lubed it). The only way I could get it on was by stretching the bucking a little. I had to cut some of it with a razor blade so I...
  20. Sniper Rifles
    Hello, I recently purchased a Matrix AW-338 MB08B Bolt Action Airsoft Sniper Rifle from Evike and I have heard reports of the gun being super inaccurate out of the box and having some problems with hopup. Since I am pretty new to airsoft I would really love some help deciding what if anything I...
1-20 of 25 Results
Top