Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-16 of 16 Results
  1. Gun Building, Modifications & Repairs
    Hey guys I have a tough problem here. I'm working on my friends G&G RK74-T, which was a great gun until the motor and etu crapped out. He wanted me to get it running again with minimal cost, so I took out the old wiring and etu and put in standard v3 trigger contacts from a JG AK-47 gearbox...
  2. Gun Building, Modifications & Repairs
    Whenever I load more than 1 bb into my army armament glock 17 and attempt to shoot, the gas just explodes and the mag unlocks from the mag well without actually falling out. I was wondering if this is a gun issue or a mag issue, if it is a gun issue if anyone knows how to fix it I will really...
  3. Beginners Forum
    My new bizon mag has an issue. After firing a couple rounds, the winding system unspools completely. Is there a fix to this or should I be winding more/less?
  4. Gun Building, Modifications & Repairs
    Hey Guys, I have an issue so I thought I could find someone here that has more experience and possibly help me find a solution :) So.. I have a fairly modified ARP9 - I changed a lot of stuff - SHS "light" ( blue ) piston, silent piston and cylinder heads, 6,03 barrel, new steel bushings, 110...
  5. Gun Building, Modifications & Repairs
    So I've finally got all of the parts for my dsg. I started with a 7.4v that was barely charged. I got roughly 25 rps. It fed fine after I cut the tappet spring down. It all fed fine all the way up to 35 rps. as soon as i used a fully charged 7.4, the gun does not feed. semi is fine but full auto...
  6. Gun Building, Modifications & Repairs
    Hello, I am somewhat new to the airsoft. A few years ago I purchased an Avengers M4 Carbine bundled in a starter kit on Evike. I used the gun for a couple of target practice, but stopped. It has not been until now my interest in airsoft has resurfaced. A week ago my M4 stopped shooting, I was...
  7. Gun Building, Modifications & Repairs
    Hello so I'll be grateful for any advice / knowledge anyone can share with me. I believe the issue I'm encountering is regarding the hopup unit/ nozzle, but I'm not exactly sure. So when I pull the trigger either the BB doesn't shoot or it will shoot two(because the first didn't shoot, so...
  8. Electric Guns
    Hello, I have the CZ805 Bren AEG from ASG company. Since buying, there are issues with gun does notfiring. First, there was problem with original mag does not feed correctly, so I decided to buy conversion chamber for m4 mags. For the first time I tried mid-caps, they had problem with...
  9. Gun Building, Modifications & Repairs
    Hi all, I am new to this forum and made this account out of desperation to hopefully find a fix to a problem I have with the gun in the title. The gun won't fire 80% of the time, I pulled the slide barrel assembly off to see I could diagnose the problem. I discovered a pin that wasn't fully...
  10. Gun Building, Modifications & Repairs
    I've had my JG sig 552 for about 5 years now, and I've played airsoft off and on throughout those 5 years. Now I've gotten back into airsoft (more than I have previously) I've been playing games with my sig. After about my first 2 games of getting back into it, I realized my trigger was sticking...
  11. Electric Guns
    I purchased my first airsoft rifle around June. It was the G&G CM16 Raider L. It works fine except the hop up doesn't really change anything about the BB flight trajectory. It literally stays the same no matter how I change it. It doesn't go up at all, all it does is dip after about 20 feet. The...
  12. Gun Building, Modifications & Repairs
    I recently bought the new e&l pmc-E and had to take it completely appart to put in a zci 6.02 tightbore and flat hop it. now for some reason my selector switch when i flip it to semi does a 1.5 to 3 round burst dropping every other bb into the dirt. not sure what i did when taking it out ive...
  13. Gun Building, Modifications & Repairs
    The problem is clear. The cylinder head is not retracting at the end of a cycle. It will stick out about 5 millimeters into the feeding tube coming from the magazine. The gun is older, and has some wear. What is the problem? Thanks!
  14. Gun Building, Modifications & Repairs
    Hi guys. I am somewhat new to teching. I am in the process of trying to upgrade a V3 gearbox and am having some troubles. I am trying to replace the standard gears with a set of 13:1 low ratio gears and the stock motor an ASG CNC U-30000 high torque motor. Everything went into place flawlessly...
  15. Gas Powered Guns
    I bought a KSC USPc a few weeks ago off another site and I have loved it. It is still stock and has only had 20 mags put through it. However, during the last few mags the slide has been locking back even when the gun isn't out of bbs. I have tried doing my regular maintenance run on the gun...
  16. Gun Building, Modifications & Repairs
    Okay... so, my brother's AK is having some issues. The gun fires as usual, but the gun will not feed. I have tried taking some bbs and placing them -in- the feeding hole thingy (technical terms, yah?). I'm no airsmith, but from what I can tell something isn't being drawn back enough to let bbs...
1-16 of 16 Results
Top