Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 57 Results
  1. Gun Building, Modifications & Repairs
    I have a KWA RM4 SR10 running a 11.1v 2500mah 30C deans connector type battery. I have been upgrading this quite a bit. Only the externals, gearbox shell, wiring, and tappet plate are still stock. As always, KWA and their proprietary parts has been an issue. Before I go and buy a MOSFET and...
  2. Airsoft Guns for Sale
    EMG Helios Knights Armament SR-16E (AEG) (With micro trigger) APS RS3 Stock ASG Infinity 20K Motor Matrix M130 Spring Angel Custom 6.01mm TBB (370mm) Maxx Model Hop Up (Red) ($500 in unit and parts)(NEVER USED IN-GAME)
    $400 USD
  3. General Accessory Discussion
    Hi, I bought a NY06 from taiwangun Around 1.5 months ago, and I experianced some issues (motor compartment cover broke and FPS dropped by ~100, but I think its all good as im in contact w/ Arcturus. The recommended me to lube the hop-up as it might "fix the problem", but I think it's BS. I might...
  4. Parts and Accessories Classifieds
    I have here a brand new Gate Titan. Just got it in the mail and I now realize the project I needed it for is long gone. So, it is being sold. It is an advanced unit. I can sell the USB link for an extra 20 dollars shipped. Just the unit: 130 USD shipped Unit with USB link: 140 USD Shipped...
    $130 USD
  5. Gun Building, Modifications & Repairs
    Hey all! This is my first (of hopefully many) review/guide thread, so please bear with me. I have an Acturus AK05 and loaned it to somebody last weekend for an event. With a few exceptions it is a very nice AEG, steel externals and basic but solid internals. When I got it back it sounded like a...
  6. Gun Building, Modifications & Repairs
    Now that I hopefully have someone's attention. I've played for a few years at home with friends and decided to "upgrade" my M4... I have a CYMA M4 with Version 2 Gearbox. Upgrades successfully INSTALLED • GATE 3.2 Merf Matrix GodZilla High Torque Motor 12:1 SHS gears With stock gears everything...
  7. Gun Building, Modifications & Repairs
    I’ve installed a Perun V2 hybrid into my cyma platinum MP5. Everything works fine until I plug the motor in. Occasionally I get a couple shots off and then the mosfet stops detecting that the motor is connected. What’s weird is that when I increase the motor height by a huge amount, sometimes...
  8. Gun Building, Modifications & Repairs
    I've recently installed a MOSFET but even before that, the fire modes haven't been working reliably. Right now semi-auto is working fine but as soon as I try full auto nothing happens. I've opened up the gearbox and haven't seen anything out of place. That being said, this is only my second time...
  9. Gun Building, Modifications & Repairs
    Hi all, having some issues with my M4 aeg. Just installed a Jefftron Leviathan optical mosfet, SHS 13:1 gears, SHS high torque motor and some other small bits. However now the gun won't cycle properly. I don't think it's a mechanical problem or at least I can't come up with what it would be, arl...
  10. Gun Building, Modifications & Repairs
    I'm trying to see why the gun isn't letting me program the mosfet. I install the battery, then it gives me a beep. Now it should beep when I use the semi auto, to Full auto (2x). But that is not working. It should give me a beep when its on program mode. The manual doesn't show a lot so I...
  11. Gun Building, Modifications & Repairs
    I have a very old Elite Force 4CRL, over the many years of its near flawless work I decided to give it a well needed upgrade. after installing a Laylax Prometheus Ver2 with a full gate titan MOSFET, it wont feed reliably with my stock hop-up and had to Jerry rig my mag well and hold pressure on...
  12. Electric Guns
    Me again with more noob questions. I've read a bunch of threads on lipos and I'm a little confused. Basically to my understanding everything should be able to handle a 7.4v but maybe not a 11.1v? I've read about draw and it shouldn't draw more then it needs but its about whether the internals...
  13. Gun Building, Modifications & Repairs
    So, story goes: I spoke to someone on Hopup about buying their used Matrix Godzilla 5000 High Torque motor. Well, a little bit of haggling ($38 shipped) and a week later, it's at my doorstep. So today I took the motor out of my Elite Force CTAR Tavor and swapped it with the new Godzilla motor...
  14. Gun Building, Modifications & Repairs
    Hey Guys, I have an issue so I thought I could find someone here that has more experience and possibly help me find a solution :) So.. I have a fairly modified ARP9 - I changed a lot of stuff - SHS "light" ( blue ) piston, silent piston and cylinder heads, 6,03 barrel, new steel bushings, 110...
  15. Gun Building, Modifications & Repairs
    Hey guys, this is my first thread here, so bear with me. I was messing around with a rear wired G&P AR15 the other day (rewiring, adding mosfet, etc.), and couldn't fit the custom mosfets that I build in it anywhere. After some consideration, I made this: Sorry that it's blurry, I took the...
  16. Gun Building, Modifications & Repairs
    Hey guys, After a year or so of buying a house an changing jobs, etc, I am getting back into airsoft and of course back into modding my favorite AEG, my JG AUG. Many of you were very helpful in the past and I'm hoping I can finally get this gun to work the way I want it to. Its current situation...
  17. Parts and Accessories Classifieds
    Prices include shipping via USPS. Payment through Paypal only. TMC blue label multicam G2 combat pants: no knee pads induced. Used, but in overall great condition. Size L (should fit between a 32 and 34 I believe) $45 Unknown brand adjustable burst mosfet. On a stock dboys AK I've...
  18. Gun Building, Modifications & Repairs
    Hello, I own a King arms 9mm SBR and I was wondering if I could handle all 11.1v 20c battery, Here are the parts I have installed ASG Infinity CNC U-30000 Motor SHS 13:1 Gears ——— The KA comes with a stock in-line MOSFET ——— Will it be able to handle an 11.1v battery?
  19. Gun Building, Modifications & Repairs
    Hi everyone, I have quite a few specific questions pertaining either to the v2 or v2.5 extended gearbox builds I’m doing. Trying to troubleshoot feeding (80% or so of shots ‘wump’) and low fps issues (~150fps with an M170) in my v2.5 AR-10 led me to all sorts of diagnostic techniques, including...
  20. Parts and Accessories Classifieds
    Homemade gearbox- $60+shipping -Silver Edge shell -Lonex gears -unknown cylinder system -m100 spring -wired to deans -GATE Titan NanoASR mosfet -deans->mini tamiya adaptor Positive motor mount broke off and I don't have replacements but a pack of 2 costs a couple bucks.
1-20 of 57 Results
Top