Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 31 Results
  1. Gun Building, Modifications & Repairs
    So I have been working on this gun for a while. Almost all the internals are aftermarket parts. I got it back together and the gears turned about half a cycle and then stop. I have taken it back apart and see nothing obvious. The shims are not too tight. AOE is good. Battery is fully charged. I...
  2. Gas Powered Guns
    So I shot my Deagle and it just suddenly failed and leaked all its gas, and it did not pull back all the way, I have searched this issue so many places, with no answers. So what happens is that every time I load a mag (with gas) and try to pull back to load it, I need to force it hath the way...
  3. Gun Building, Modifications & Repairs
    Hi all, having some issues with my M4 aeg. Just installed a Jefftron Leviathan optical mosfet, SHS 13:1 gears, SHS high torque motor and some other small bits. However now the gun won't cycle properly. I don't think it's a mechanical problem or at least I can't come up with what it would be, arl...
  4. Gun Building, Modifications & Repairs
    Hi! I've been having issues with the pistonhead scratching the inside of the cylinder, specifically the bottom side of the cylinder. It was probably a cause of bad aoe but now that is corrected with the piston also having the first 2 teeth filed down. Changed the cylinder and polished the...
  5. Gas Powered Guns
    I have this strange problem and can't figure out why. I own a KWC Taurus 24/7, and I have two metal mags and a plastic one. When using any of the metal mags, sometimes the gun fires two or more bbs with one trigger pull (kind of like a little shotgun), at times emptying a 15-round mag in as...
  6. Gun Building, Modifications & Repairs
    So, as some of you may know, I have a CYMA AIMS (CM.050) that I'm planning on upgrading. Part of this includes a Tienly GT-35000 motor, which I got yesterday and installed today. However, when I installed it, the gun wouldn't fire. I'm DEAD CERTAIN I did everything right, from plugging the...
  7. Gun Building, Modifications & Repairs
    Hey there guys. I am new to airsoft and I have bought a JG AUG. I knew that it is a bad gun for a beginner but it is my favourite weapon and i wanted it so bad. Anyway, from the first time I got it it started behaving a little weird. Let me explain. Even before using the gun for a match, I...
  8. Gun Building, Modifications & Repairs
    i have a custom version 2 gearbox high speed build. my problem is that if i shoot in semi it will fire but sector gear will rotate a little too much after a shot which pulls the tappet plate about as far back as it can go. this causes a dramatic loss of fps. my theory is that the cheap APS...
  9. Beginners Forum
    So, recently I decided to order parts for my gun, just external stuff didn't want to mess with anything on the inside of the gun. I bought a new pistol grip for my cqb m4 and after switching it out the gun didn't work. After watching a video I realized I put the wires in the wrong spot after...
  10. Gun Building, Modifications & Repairs
    So today I bit the bullet and took apart my AUGs gearbox to put in a full cylinder and also to put in the Tienly motor Guges sold me. I then reshimmed and also put the original semi auto trigger switch back in because the new one was too short and wasnt contacting. Closed everything up without...
  11. Gas Powered Guns
    I am having problem with my WE AK74UN - one single fire mode when I press the trigger the gun shoots(as it should be) but when I release the trigger it shots as well - working in sort of burst mode. Do you know what could be the issue and how could I fix this?
  12. Gun Building, Modifications & Repairs
    Hello, I am somewhat new to the airsoft. A few years ago I purchased an Avengers M4 Carbine bundled in a starter kit on Evike. I used the gun for a couple of target practice, but stopped. It has not been until now my interest in airsoft has resurfaced. A week ago my M4 stopped shooting, I was...
  13. Gun Building, Modifications & Repairs
    prometheus bucking and flat tensioner on cyma cm0.76 but i have problem to adjust amount hop i want its either no or to much curve with and i reach 1/3 of my max hopup arm capability. Its really hard to find perfect spot to fine tune. Using 0.3 bbs. Any ideas how to fix it.
  14. Gas Powered Guns
    Hello there, I'm new to these threads, so I hope I am posting in the right area. Recently I have been working on building a hi-capa build, and I'm a good way into the build, but now I'm running into a problem that I don't know how to fix. The problem is that I installed a UAC Aluminium loading...
  15. Gun Building, Modifications & Repairs
    I don't know if anyone have ever encounter the same problem that I have with the pistol but when I put the mag in and fire the fire shot it goes crazy and start firing full automatic until there is no more Co2. The other situation that happen is I load the emptu mag, cycle the gun and fire a...
  16. Electric Guns
    I purchased my first airsoft rifle around June. It was the G&G CM16 Raider L. It works fine except the hop up doesn't really change anything about the BB flight trajectory. It literally stays the same no matter how I change it. It doesn't go up at all, all it does is dip after about 20 feet. The...
  17. Gun Building, Modifications & Repairs
    I'm sorry if this is a repost but I couldn't seem to find a thread with this issue. My friend and I recently installed the prowin hop up into our AEG's and occasionally our mags wont fit (these are mags that have always fit in our guns prior to the upgrade) After trying a few select mags and...
  18. Gun Building, Modifications & Repairs
    So I got an Elite Force 1911 Tac for Christmas I'm having some issues with the hopup. It's stuck at full no matter which position the hopup adjustment dial is in. It would probably be easy to fix if I could just remove the inner barrel/hopup. However, there is a small pin preventing those from...
  19. Electric Guns
    Hey guys I recently purchased a G&g cm16 srl with a mosfet and I was playing today, and it was a bit chilly but not terrible, and the gun would fire fine then once I got onto the field the gun would fire one bb good as well as the next one and then the third would spin the motor and bring the...
  20. General Airsoft Discussion
    Okay, so I have terrible eye sight. Im very near sighted. That being said, when I play airsoft I run Lancer Tactical Goggles over my Prescription Glasses. When I play, I get no fog in my glasses or goggles, but something just as annoying...Sweat. The sweat comes from my forehead/eyebrows I...
1-20 of 31 Results
Top