Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 42 Results
  1. Gun Building, Modifications & Repairs
    Working on a set of KWC UZI's with some internal recoil damage from the CO2 these normally run. They're neat guns, but have nothing but a very, very stiff spring and pin as a "buffer" that strikes the top of the rear-receiver. Between that and CO2 pushes a lot of pressure into these guns it's...
  2. Gun Building, Modifications & Repairs
    Gun is a G&G Combat Machine CM16 SRXL red edition. gun is only 6 months old but hasn't been used a lot. Yesterday at a game, my semi auto stopped working. what happens is that if i try and shoot semi auto at more than like 5 rps, it just dies. no noises or straining, its like the battery came...
  3. Gun Building, Modifications & Repairs
    Hey all, I’m in the process of restoring an old cyber gun Thompson and was wondering where I can find parts for it. It currently needs the entire rear sight - including the triangle sides - and a charging handle. I’ve attached the current state of the upper receiver below.
  4. Gun Building, Modifications & Repairs
    Hello all! I have a friend that recently got the KLI Baba Yaga from an Airsoft GI mystery box, and it had a few issues the first time he used it. First of all, when he tries to fire, sometimes it won't, and the trigger feels like it is a two-stage trigger even though it did not before. could...
  5. Electric Guns
    Hey guys i'm fairly new to this comunity. Also english is not my first language so sorry for any typos. So, i bought myself a cm048 a couple years ago, barely used it, but lately it has stopped working after using it for some time, lemme explain, i start shooting, but after using it for around...
  6. Gun Building, Modifications & Repairs
    Kind of a whacky question, does anyone know where I can find a microswitch for an S&T PPSH-41 EBB, or similar that will work with the model? Picked up a boneyard and looking to repair it, seeing as the microswitch is the only thing wrong with it. Any help is appreciated, and links would be...
  7. Gun Building, Modifications & Repairs
    I've recently installed a MOSFET but even before that, the fire modes haven't been working reliably. Right now semi-auto is working fine but as soon as I try full auto nothing happens. I've opened up the gearbox and haven't seen anything out of place. That being said, this is only my second time...
  8. Beginners Forum
    if any possible part of an AEG gun gets broken, can it be replaced by yourself at home if you have either a little or a lot of experience of fixing AEGs?
  9. Gun Building, Modifications & Repairs
    Howdy. I'm brand new here and thought I should share my latest repair experience. I will attach photos with some commentary/questions in the replies. I will continue to update this thread as I continue work on my RIF. This gun was having semi-auto lock-up issues since brand new, not terribly...
  10. Beginners Forum
    Hello, I'm writing this to ask if anyone knows where I can get replacement parts for my TM HK416D? Mine fell and broke at the rear of the lower receiver.
  11. Gun Building, Modifications & Repairs
    This is the gun i'm talking about in this thread. --> https://www.airsoftgi.com/product/AGM-MP031-M4A1-Carbine-AEG-Airsoft-Rifle-Black-4539/ I bought this gun from a friend who was leaving airsoft and it shot fine, used it for a few games. Then I put it into storage and when I pulled it out and...
  12. Gun Building, Modifications & Repairs
    so i have a project gearbox full of a bunch mix matched parts to get a high rate of fire. and it cycles fine but after i shoot the nozzle only sticks out about halfway. its almost like the gears are rotating a little too far forward after each shot or the mosfet is causing it to rotate the gears...
  13. Gun Building, Modifications & Repairs
    I've been looking around for new tools to stick in my toolbox. Someone had mentioned most airsoft guns are made of Zamak 3,4 or 5, which is a zinc alloy. If guns are made of a standard zinc alloy, they might be solderable, and I did some some digging. Super Alloy 1 keeps popping up and it is...
  14. Gun Building, Modifications & Repairs
    Have a krytac crb that has been used twice started slipping out of semi and into full auto during the game, looking to fix that, add a r hop and precision inner barrel, Let me know pricing, I can provide parts or just pay you for them what ever is easier. Contact me on here or by email...
  15. Gun Building, Modifications & Repairs
    Hey guys, little bit of a repair newbie but I dropped my KJW KP-17 pistol on its slide and two tiny little pieces broke off from the inside and I have no clue how they are oriented or how I could even repair it because they dont make the pistol anymore. Any help is appreciated and I will post...
  16. Gun Building, Modifications & Repairs
    Been shooting real firearms my whole life, but must be *** with airsoft. Bought a WE glock 19 for practice and completely botched a standard dis/reassembly by installing the barrel upside down and trying to reassemble. The barrel itself is stuck. The slide moves a few mm back and forth. The...
  17. Gun Building, Modifications & Repairs
    So the problem is once i put the gearbox it the lower and the upper and insert all the pins: safe works great, semi works great, auto when u pull the trigger it goes back slightly and when u apply some pressure it snaps back (as if you were on safety and then suddenly it gives) and does not...
  18. Gun Building, Modifications & Repairs
    hi recently my blowback on my Lancer tactical MMC 14" carbine stopped working and the charging handle would get hung up on it so I removed the piece and wish to put it back in but when I was taking it out to begin with it just fell out so I have no idea where it's supposed to go. Below is a...
  19. Gun Building, Modifications & Repairs
    I have an aeg game face GFM4 rifle. I read around and figured the piston was halfway through shooting and it couldn't finish that cycle. So I took it apart and made sure everything was in place. I also flipped the anti reversal latch to make sure the piston was not half way through another shot...
1-20 of 42 Results
Top