Search Results for ‘shimming’

So the problem I'm having is that my new long type ZCI motor sits too high on the bevel gear. It's high enough that when I'm shimming using the half shell method, the bevel gear tilts down towards the motor and becomes completely stuck. When I compare the ZCI motor to the stock one, the ZCI...

Because this gun is new and people are still getting there hands on them, I don't know if the upgrades suggested by evike are appropriate. Hence I am looking for second opinions from the forum. Not to discredit them, just looking for more opinions. The gun is the new p90 with a spring of 400...

Hey guys, I've got a small problem with my Cyma SR25 and seek your help to fix this... The alignment from nozzle to bucking seems to be off. When I look down the inner barrel I can clearly see the two circles (bucking and nozzle) but the nozzle is not centered. It sits too high and a bit to the...

Hey Guys, I have an issue so I thought I could find someone here that has more experience and possibly help me find a solution :) So.. I have a fairly modified ARP9 - I changed a lot of stuff - SHS "light" ( blue ) piston, silent piston and cylinder heads, 6,03 barrel, new steel bushings, 110...

A good mesh between the pinion and bevel provides a quiet gun with minimal squeal (Provided the tooth profiles match). I started doing this awhile ago as part of my shimming routine in order to get the pinion/bevel mesh as good as I could realistically get. The steps go as follows: 1. Cut a...

I've been adding upgrades to my G&G GR15 Raider to improve trigger response and power. After putting the gearbox together (motor, trigger, lower receiver, etc.) and hooking it up to a 9.6v NiMH battery, the wires get really hot after 60-90 consecutive shots on semi. They seem to get hottest at...

I've made my first attempt at upgrading my G&G GR15 raider to have better trigger time. For the sake of this post, here are the relevant parts: SHS 13:1 gears | Magic Box 30K High Torque motor (Long-axis) | Modify 8mm ceramic ball bearing bushings | Modify shims | All other parts are stock...

Hi guys. I am somewhat new to teching. I am in the process of trying to upgrade a V3 gearbox and am having some troubles. I am trying to replace the standard gears with a set of 13:1 low ratio gears and the stock motor an ASG CNC U-30000 high torque motor. Everything went into place flawlessly...

Hey guys, So I'm shimming this gun currently and I just cant seem to get it sound how i want it. I've been using the Bevel to Pinion method so I've set the motor height using the half shell method and now I'm trying to get the up and down movement of the gear right. So my questions are: 1 -...