Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Gun Building, Modifications & Repairs
    Title says it. I've isolated compression ( it's near perfect) . I'm running a matrix m140 and its doing 350-415. I don't think it's mis packaged spring because it shoots noticably slower with a 11.1v lipo (using 14v) Could this be a tappet plate issue? I'm using the crescent shape type but...
  2. Gun Building, Modifications & Repairs
    Help! This it’s my first Dsg! I knew before I started that I would encounter problems but I can’t find a fix for this one. My tappet plate is getting chewed up by my sector gear. Does anyone know a fix for this?
  3. Gun Building, Modifications & Repairs
    i have a custom version 2 gearbox high speed build. my problem is that if i shoot in semi it will fire but sector gear will rotate a little too much after a shot which pulls the tappet plate about as far back as it can go. this causes a dramatic loss of fps. my theory is that the cheap APS...
  4. Gun Building, Modifications & Repairs
    so i have a project gearbox full of a bunch mix matched parts to get a high rate of fire. and it cycles fine but after i shoot the nozzle only sticks out about halfway. its almost like the gears are rotating a little too far forward after each shot or the mosfet is causing it to rotate the gears...
  5. Gun Building, Modifications & Repairs
    Hello, the problem is that when I put the magazine in BB's push the nozzle back and multiple BB's can enter the chamber it causes jamming on both semi and auto. When I remove the magazine and put multiple BB's in to the hop up and don't push them then gun fires perfectly. I think problem is in...
1-5 of 5 Results