Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 34 Results
  1. Electric Guns
    So i got a Sword Arcturus NY06, wanted to put a titan into it, For starters you can´t cause Arcturus has a special selector plate, and tilted at the bottom, different gearbox shape. So i grabbed a JG works gearbox cut it up to size got it shimmed, perfect airseal perfect shim job. No leaks in...
  2. Technical Articles & Write-Up Submissions
    I have found that systematizing my tech work flow has helped my consistency greatly. I think that this template may be helpful to beginner or intermediated AEG techs or people like me with a little ADHD. I had an idea of "I'll just write it down" and this is what has come out of a lot of time...
  3. Gas Powered Guns
    I have an EMG DDM4A1 GBB. I just received my G&P npas bolt carrier group. (gp-wp206a) I know this is an old setup these days, but I was hoping someone here had a basic rundown of how to assemble the nozzle(s) correctly. I cannot find a single manual or assembly demo online anywhere. Thanks...
  4. Gun Building, Modifications & Repairs
    Hey everyone, I'm looking for some help determining the stock compatibility of the HK33 by Classic Army. So far the only stock I have tried is a retractable stock from an ICS MP5. The issue with that was the stock cap was too small and the arms to the stock itself were too big. I wanted to...
  5. Electric Guns
    Hello. I have recently got a annoying issue with my stock A&K mk46 (It's my first season with it). This has happend twice now and I have no clue for where to start (*but I have orderd a new microswitch just in case*). The issue is the following. The LMG shoots fine, but suddenly it stops...
  6. Gun Building, Modifications & Repairs
    Hello all. I'm having issues with my DSG build where the piston seems to be half reciprocating on the first trigger pull, and then cycling twice on the second pull. With the gearbox open, the sector gear seems to be picking up the teeth of the piston just fine so I'm at my wit's end as to...
  7. Introductions
    Hello all! I'm new to the forum but not to airsoft. I've been getting more into teching and that's why I came to this forum of overflowing experience and wisdom. I have a few questions I would love some answers to considering I've search online and found very little credible information. 1.)...
  8. General Airsoft Discussion
    Gun only feeds when I turn active break on slightly. I have tried trimming tappet plate coil, then I tried delayer chip, then I got a adjustable nozzle and tried every size. Nothing worked, I am gonna try trimming the tappet plate itself now. The sector gears i have are short stroked 3 teeth...
  9. General Airsoft Discussion
    Over amping up to 103 amps with Specna. jefftron optical 120 spring 22 tpa zci 13:1 gears Using either a 1000mah 20-40c or a 2200mah 30-50c I am having insane amps. I am reading on avg in semi 90-97 with peak amps reaching 103 at times. I am running almost no active break currently...
  10. Gun Building, Modifications & Repairs
    Hey guys, I've got a small problem with my Cyma SR25 and seek your help to fix this... The alignment from nozzle to bucking seems to be off. When I look down the inner barrel I can clearly see the two circles (bucking and nozzle) but the nozzle is not centered. It sits too high and a bit to the...
  11. Gun Building, Modifications & Repairs
    I've been getting inconsistent feeding problems from my EMG F1, it will only shoot two of three shots or so. Its supposed to be brand new but I don't know if that's 100% true as I got it in a trade
  12. Gun Building, Modifications & Repairs
    UPDATE: Noticed second hairline crack and the sound it made, right across the front screw holes on the spine there is a chunk that can be removed. My final verdict is a new gearbox is needed. Still fixing my friend's gun Cleaned it out with soap and water to get rid of all of the grease...
  13. Gun Building, Modifications & Repairs
    A friend gave me his gun so I opened it up, its a mess. A wire was shredded by the motor, the fuse was blown, everything was covered in grease. These are all mostly easy to fix. The problem is that the air seal is a joke. How would I fix this?
  14. Gun Building, Modifications & Repairs
    Hey AirsoftSociety... I have a really quick question. Since the LCT VAL has a v3 gearbox, does it have a v3 hopup unit as well? Couldn't find info anywhere, I wasn't sure whether the hopup was proprietary or not. Thanks again, CM
  15. General Airsoft Discussion
    So my tar-21 has this problem where on full auto, every consecutive shot curves up after the first shot (over hopping). However, on semi-auto, this problem is absent. I have tried cleaning the barrel and lubing the hop up chamber and the lubing does help for a short while but it goes right...
  16. Gun Building, Modifications & Repairs
    I’m having feeding issues in my CYMA M4. The only things I’ve changed internally are the bucking, inner barrel (Prometheus 6.01) and I did the home made flat-hop (eraser). I thought maybe it’s the mags but I used KWA K120’s and I bought them for their lack of feeding issues. Any ideas? Thanks.
  17. Gun Building, Modifications & Repairs
    Hey there guys. I am new to airsoft and I have bought a JG AUG. I knew that it is a bad gun for a beginner but it is my favourite weapon and i wanted it so bad. Anyway, from the first time I got it it started behaving a little weird. Let me explain. Even before using the gun for a match, I...
  18. Gun Building, Modifications & Repairs
    A long time ago, I traded with someone for their KWA Glock. I knew it had some issues, but I love the gun and its look. Unfortunately, it is not functioning at all. The issue I am having is when I try to shoot it, the slide only blows a little bit back and a lot of gas is released out the...
  19. Gun Building, Modifications & Repairs
    Has anyone tried dream army parts before? I recently came across this website khmountain.com and they’re selling these metal airnozzles made by dream army with an oring for under $5 which is unreal to me. They’re also selling $23 neo magnet motors, $12 gearsets, $6 metal rack pistons, and a...
  20. General Airsoft Discussion
    So, I'm building a shotgun sniper. My problem is the spring and hop-up unit. Hears the gun: https://www.evike.com/products/32762 My questions- How do I replace a shotgun Spring?What spring should I use? Replaceing the barrel? And how do you flat hop a shotgun hop up? (Or anything about...
1-20 of 34 Results
Top