Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 49 Results
  1. Gun Building, Modifications & Repairs
    Hello all! I have a friend that recently got the KLI Baba Yaga from an Airsoft GI mystery box, and it had a few issues the first time he used it. First of all, when he tries to fire, sometimes it won't, and the trigger feels like it is a two-stage trigger even though it did not before. could...
  2. Gun Building, Modifications & Repairs
    I’ve installed a Perun V2 hybrid into my cyma platinum MP5. Everything works fine until I plug the motor in. Occasionally I get a couple shots off and then the mosfet stops detecting that the motor is connected. What’s weird is that when I increase the motor height by a huge amount, sometimes...
  3. Gun Building, Modifications & Repairs
    Hi! I've been having issues with the pistonhead scratching the inside of the cylinder, specifically the bottom side of the cylinder. It was probably a cause of bad aoe but now that is corrected with the piston also having the first 2 teeth filed down. Changed the cylinder and polished the...
  4. Gun Building, Modifications & Repairs
    Warning this will be a loong read!! Alright i need fresh pair of eyes on this one, got the gun second hand from a guy who supposedly only used it a couple of times. And externaly and internaly it does look almost brand new, completely stock. So first thing i had to do was change the hop unit...
  5. Gun Building, Modifications & Repairs
    I've jumped into some teching projects and I wanted to know what grease was best, preferably something I could get at a local hardware store because it would be so much cheaper than the same thing but with a brand name on it.
  6. Gun Building, Modifications & Repairs
    Hey AirsoftSociety... I have a really quick question. Since the LCT VAL has a v3 gearbox, does it have a v3 hopup unit as well? Couldn't find info anywhere, I wasn't sure whether the hopup was proprietary or not. Thanks again, CM
  7. Gun Building, Modifications & Repairs
    First thanks to @aotsukish for the help and advice! EMG Helios F4 Defense Licensed F4-15 ARS-L MLOK M4 Airsoft AEG Rifle (Model: PDW-X / Black) Internals (Upgraded) GATE Titan Advanced 13:1 Rocket Gearset Prometheus Irregular Pitch MS110 Spring Tienly Infinity GT GEN4 25,000RPM Prometheus...
  8. Articles
    How are ya now. I and starting to get back into the sport after having moved here from Washington State. I have bought a couple parts lots and have quite a few guns I am working on to sell and then get out the door. Inside my ADHD squirrel brain some how on a sleeper gun kick... well also I am...
  9. Illinois Airsoft Forum
    Hello, I need my Krytacs gearbox rewired, I'm not looking to do it myself because im awful at wiring and would make it worse. Are there any local techs close to the west suburbs or within reasonable distance? Somewhere other than MIR and the usuals, i'd also like to support someone local. Thanks
  10. Airsoft Guns for Sale
    came across a boneyard G&P m14 with a cracked gearbox that I bought off of a local player and decided to fix it up. It shoots 2.15 joules on a m135 spring. Airseal is perfect but there's a noticeably big deviation of FPS of ~15, this is because the M14 nozzle goes into the hop up at an angle...
  11. Gun Building, Modifications & Repairs
    Ive been working on a g&p m14 and when I go to test it, its shooting 1j with .32s on a m135. I have perfect air compression and nozzle to bucking. I checked, trust me, I'm not new to teching. I opened up the gearbox again and put a different m135 spring in it and I'm still getting similar...
  12. Gun Building, Modifications & Repairs
    Has anyone tried dream army parts before? I recently came across this website khmountain.com and they’re selling these metal airnozzles made by dream army with an oring for under $5 which is unreal to me. They’re also selling $23 neo magnet motors, $12 gearsets, $6 metal rack pistons, and a...
  13. Gun Building, Modifications & Repairs
    so i have a project gearbox full of a bunch mix matched parts to get a high rate of fire. and it cycles fine but after i shoot the nozzle only sticks out about halfway. its almost like the gears are rotating a little too far forward after each shot or the mosfet is causing it to rotate the gears...
  14. General Airsoft Discussion
    I replaced the inner barrel and bucking on mine but I would really like to know what my options are in future internal upgrades that don't change it into a HPA. Right now im using those newish valken li-ions as the battery connection is in the small front handguard and no other li-ions that I...
  15. Articles
    Dang, the pics aren't working....I'll work on that. Let me know if you guys can see this! I got this motor from @Guges Mk3 to test out because he wanted more people to try Tienly motors and offered to sell me one for a very good price. So I bought the motor and a couple other things and said...
  16. Gun Building, Modifications & Repairs
    Hi All, First of Thanks for Looking. So I am refurbishing a couple of Rentals and turning them into CQB length 10.5" Outer Barrels. I am debating on cutting down the outer barrel and threading it, but haven't made up my mind yet. Full metal outer barrels are relatively cheap, so I may go that...
  17. General Airsoft Discussion
    Hi All, First thanks for checking out this post. I am new to airsoft and teching, but am familiar with Mechanical and Electrical work like this. I have been tinkering and working on my own stuff and have contracted with my local field to do their Tech work. I am trying to come up with a...
  18. Gas Powered Guns
    Hello there, I'm new to these threads, so I hope I am posting in the right area. Recently I have been working on building a hi-capa build, and I'm a good way into the build, but now I'm running into a problem that I don't know how to fix. The problem is that I installed a UAC Aluminium loading...
  19. Gun Building, Modifications & Repairs
    Hello so I'll be grateful for any advice / knowledge anyone can share with me. I believe the issue I'm encountering is regarding the hopup unit/ nozzle, but I'm not exactly sure. So when I pull the trigger either the BB doesn't shoot or it will shoot two(because the first didn't shoot, so...
  20. Gun Building, Modifications & Repairs
    What do you guys think is the most balanced/best -TPA-Gear Ratio, ex. 16TPA-18:1 For -10:1 -12:1 -13:1 -16:1 -18:1 *I know that the spring rating is also a factor for this, so lets say we were aiming for 400 FPS and the fastest ROF within reason. My next question is what is the...
1-20 of 49 Results
Top