Airsoft Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 25 Results
  1. Gun Building, Modifications & Repairs
    Help! This it’s my first Dsg! I knew before I started that I would encounter problems but I can’t find a fix for this one. My tappet plate is getting chewed up by my sector gear. Does anyone know a fix for this?
  2. Gun Building, Modifications & Repairs
    Hey guys, I've got a small problem with my Cyma SR25 and seek your help to fix this... The alignment from nozzle to bucking seems to be off. When I look down the inner barrel I can clearly see the two circles (bucking and nozzle) but the nozzle is not centered. It sits too high and a bit to the...
  3. Airsoft Guns for Sale
    I'm working on putting together a Swedish milsim so I am looking for a g&g ak5c and I would actually prefer one in non-working condition
  4. Gun Building, Modifications & Repairs
    Hola AirsoftSociety, Before I start, I'd like to assure you guys that I have done my research, and my question is not something readily available on the internet (to my knowledge). Build Overview: SR25 DMR Project Cyma SR25 Base 450-500 FPS Goal SP140 or 150 Spring Siegetek 21:1 Gears BTC Mk2...
  5. Gun Building, Modifications & Repairs
    I’m going to overhaul an ICS M4, and want advice for the lowest stress combination for my specifications. So, a 22 TPA motor can easily pull an M120 on a 12:1 set. The stress on the gears, however, gets to be pretty impressive. A 16 TPA motor can easily pull an M120 on an 18:1, and here the...
  6. Gun Building, Modifications & Repairs
    I might as well start one to keep track of all my projects since I work on a lot of guns for myself and friends. I don't usually take too many pictures once I start working, so internal reviews will be mostly text.
  7. Articles
    I got this motor from @Guges Mk3 to test out because he wanted more people to try Tienly motors and offered to sell me one for a very good price. So I bought the motor and a couple other things and said I'd do a review and see if they're worth the money. Apparently this is a gen 3 and Tienly is...
  8. Sniper Rifles
    I have a wells mb05 l96 sniper ive been working on and i want a inner barrel thats either 6.00 super tight bore or a 6.01 its needs to be 24.5inches long i would prefer stainless steel over brass but looking at the results i have found begger cant be choosers ,it would also be great if it...
  9. Gun Building, Modifications & Repairs
    Im looking to start a little part time airsoft teching/upgrade business next summer, it would be sort of like a bootleg umbrella airsoft, where people lend me their guns and for a profitable price i would upgrade them internally. I was just looking for some advice or tips and feel free to share...
  10. General Airsoft Discussion
    Hi All, First thanks for checking out this post. I am new to airsoft and teching, but am familiar with Mechanical and Electrical work like this. I have been tinkering and working on my own stuff and have contracted with my local field to do their Tech work. I am trying to come up with a...
  11. Gun Building, Modifications & Repairs
    So my CRB is having feeding issues, where it will inconsistently feed and misfire with any type of magazine and any brand. List of Upgrades/Parts: • Rewired to deans, no fuse • Lonex Non-Ported Cylinder and Lonex Double O-Ring Cylinder Head • SHS Swiss Cheesed Piston and Super Shooter Ball...
  12. Gun Building, Modifications & Repairs
    I'm currently working on a high fps setup and obviously need better gears, I looked around for some time and now I want to know are Prometheus gears really worth it or is it better to go with a cheaper variant like SHS or Guarder? (the gears should be able to withstand M190 springs and higher)
  13. Gun Building, Modifications & Repairs
    anybody have experience with the WASP gearbox control kit. From my knowledge it's like the gate titan and the btc spectre. It's found on eBay and I can't find any reviews on YouTube or the forums
  14. Gun Building, Modifications & Repairs
    I was working on an AEG yesterday and short stroked my gun because it was shooting too and accidentally removed 2 teeth on the release side of the sector gear. People have said that doing it from the release side is bad for it and I want to know if that is true or not if it's just 2 teeth.
  15. Electric Guns
    I was searching through eBay today to maybe see if I could pick up some good deals and came upon a mosfet called the WASP B2 gearbox control kit. It looks remind me of a GATE titan and a BTC spectre but whenever I searched it into google there hasn't been any reviews and stuff on the forums...
  16. Gun Building, Modifications & Repairs
    Hey guys! I am getting back into airsoft after a 2 year break, and i'm getting into teching now. I'm attempting to fix up an old M4 i have before i sell it. I am attempting to remove the upper RIS from the gun, and have had no luck. It is a JG/Matrix M4-16 Zombie KIller. THe RIS is rather odd...
  17. Gun Building, Modifications & Repairs
    Got some shs 12:1 gears and motor. Tested the motor with my old gears and it worked fine. Got the new gears in, and it didn't work, made a grinding noise then a small whine like the motor was trying to move but it couldn't. Took it all apart, inspected it found no issues then tried it again...
  18. Gun Building, Modifications & Repairs
    I am building a ground-up DMR and decided to build my own gearbox (with a Lonex 8mm Shell), and want to know how to make it without having a full-auto option. I want to use it at American Mil Sim events, which require that DMRs are not able to shoot full-auto. I want to know how to make it so...
  19. Gun Building, Modifications & Repairs
    I've tried my best to research which lube I should be using in my AEG build, but I can't seem to settle on a "single" lube. I've looked in places like ASF, trying to find reliable, and legit information. Some places had too many things to dig through, so I might've missed something there. What...
  20. Beginners Forum
    Hi, Im currently Picking parts out for a DMR build I'm hoping I'm going to be able to do in the near future. I wanted a unique look to the rifle so I have been looking at the socom 47 receivers on evike http://www.evike.com/products/44597 and I wanted a internally silenced look and I thought a...
1-20 of 25 Results
Top