6.03 650mm vs 510mm 6.01

Discussion in 'Gas Powered Guns' started by SSGSPEEDMAN, Nov 2, 2012.

  1. SSGSPEEDMAN

    SSGSPEEDMAN New Member

    149
    1
  2. Star_folder

    Star_folder New Member

    1,056
    1
    Lexington
    Well, you're kind of between a rock and a hard place here, by giving us these two choices.

    On one hand, the 6.03 is better for longer shots, but the 650mm barrel will degrade the hop on the bb. On the other hand, the 6.01 barrel is not as good for longer range shots, but the 510mm barrel won't degrade the hop as much.

    On one hand, the 6.03 will have less pressure behind the bb, but the 650mm barrel means an extra 140mm that the bb will accelerate down the barrel. On the other hand, a 6.01 will have more air pressure behind the bb, but only 510mm to accelerate before it leaves the barrel.

    hmmmm, idk, how close are you to your fps limit? The 510mm will probably give you a bit less fps, but the 650mm will give you more. If you don't care, I'd get the 650mm.
     

  3. YoYo-Pete

    YoYo-Pete New Member

    126
    0
    Ypsilanti
    [Post Removed - Didnt realize this was GBB]
     
  4. SSGSPEEDMAN

    SSGSPEEDMAN New Member

    149
    1
    I have the 510mm already that is what im using in the vids. I guess i should add that Falcon sent me there new test version of the kc02 bucking. I can adjust the psi for a legal fps limit.
    Kevin
     
  5. EDI1st

    EDI1st New Member

    2,062
    3
    Fountain Valley
    Learn to do some research.
     
  6. npav85

    npav85 New Member

    17
    0
    Go with the 6.01 mm barrel.
     
  7. Star_folder

    Star_folder New Member

    1,056
    1
    Lexington
    Why Should he, explain your answer.