A&k m249 saw help

Discussion in 'Gun Building, Modifications & Repairs' started by cyborgassassin, Dec 6, 2012.

  1. cyborgassassin

    cyborgassassin New Member

    11
    0
    cazenovia
    my SAW is having problems the gun fires when i am not holding the trigger for about 10 to 30 seconds after i let go. How could i fix this?
     
  2. SilentVectorX

    SilentVectorX Member

    597
    1
    San Angelo
    The lever on your microswitch is too long, you need to trim it down a few millimeters, as well as possible bend it to a different shape so it doesn't get caught by the sector gear teeth. It's a very common problem.

    Also, it you're using a high voltage battery, the microswitch contacts could be fusing together from the heat.
     

  3. cyborgassassin

    cyborgassassin New Member

    11
    0
    cazenovia
    thank you for your help i appreciate it.
     
  4. SilentVectorX

    SilentVectorX Member

    597
    1
    San Angelo
    Your welcome. If you can't figure it out, let us know. I have one here and can take pictures if absolutely necessary (though I'd rather not make promises, as I have a lot of projects to work on right now).
     
  5. cyborgassassin

    cyborgassassin New Member

    11
    0
    cazenovia
    Ok I will thanks.

    (20characters)
     
  6. BoogerMc

    BoogerMc Airsoft Jedi Master Supporting Member

    4,815
    234
    Akron