Airsoft Forum banner
1 - 1 of 1 Posts

Premium Member
798 Posts
Some bad news unfortunately - that AEG has a proprietary handguard that's integrated into the AEG's receiver so you can only swap it with other rails from the same gun/series.

The good news is, they did make versions of this AEG with shorter handguards so if you can track one down you should be able to swap it on without difficulty. Here's a 9" version, same site has shorter ones as well :)

This is what's under that rail BTW. Use the tabs as leverage to rotate the ring to remove the barrel. Not sure if the barrel is proprietary or standard - would need to find out before ordering a shorter one.
Automotive lighting Automotive tire Bicycle part Automotive exhaust Bumper

(Pic from google)
1 - 1 of 1 Posts