Agm l96

Discussion in 'Sniper Rifles' started by bloobf, Aug 16, 2012.

  1. bloobf

    bloobf New Member

    8
    0
    The AGM l96 on airsplat comes with scope mounts but I was wondering if I can use my UTG scope rings for it? Help is appreciated
     
  2. soviet

    soviet Active Member

    4,121
    0
    Yes the UTG scope will work. BUT I WARN YOU!
    If you don't upgrade your sniper any decent AEG will out preform your gun.

    AGM and UTG = same gun.
     

  3. Ranger

    Ranger New Member

    764
    0
    Onsted
    The Agm and the Utg are not the same what so ever, sorry buddy. The reciever on the Agm looks like a Bar10. Its round, uses a mini version of the Vsr hopup and has a side adjuster.

    The Utg reciever is square ish. Totally different hopup system that adjusts from an allen wrench under the stock. Uses a different trigger setup with a 90 degree sear and the Agm uses a 45 degree sear Vsr triggerbox.. the only thing thats the same is the way the stock looks.
     
  4. soviet

    soviet Active Member

    4,121
    0
    There L96 are the same. Well some on here told me that. But the rail mount should work?
     
  5. ncore

    ncore New Member

    1,064
    0
    Pittsburgh
    I am pretty sure the op is referring to the type 96 by both manufacturers, Agm, and Utg, which are clones of the same gun and should be almost exactly identical.

    Now, why somebody would buy a clone of the exact same gun that they have, I don't know. Instead of having two of the exact same sniper rifle, I would just buy some upgrade parts and have one really good gun instead of two crappy ones.
     
  6. Ranger

    Ranger New Member

    764
    0
    Onsted
    The two are not alike, go look at some pictures of the Agm.. I have one on my lap, they are not the same rifle. I have had the UTG, and I currently own the AGM. If you really need me to prove it I can. I have been an airsoft sniper for 12 years,lol..
     
  7. ncore

    ncore New Member

    1,064
    0
    Pittsburgh
  8. Ranger

    Ranger New Member

    764
    0
    Onsted
    EXCEPT, the rear of the reciever where the handle attatches, the AGM is tube style, like the Bar10. The UTG is square! NOT like the AGM. They use DIFFERENT mags also..


    UTG.[​IMG]
    http://www.google.com/imgres?q=utg+mk96&um=1&hl=en&safe=off&sa=N&biw=1008&bih=603&tbm=isch&tbnid=RiPm4ctba6YBPM:&imgrefurl=http://www.shortyusa.com/cart/viewitem.html%3FII%3D1183&docid=X9dLVwP_XClKVM&imgurl=http://www.shortyusa.com/cart/images/1183a.jpg&w=500&h=331&ei=jcMuUMGKL_SHyQH5goC4Dg&zoom=1&iact=hc&vpx=404&vpy=291&dur=12&hovh=183&hovw=276&tx=135&ty=104&sig=113250377536163245590&page=1&tbnh=114&tbnw=152&start=0&ndsp=15&ved=1t:429,r:7,s:0,i:137

    AGM..[​IMG]
    http://www.google.com/imgres?q=AGM+mk96&um=1&hl=en&safe=off&biw=1008&bih=603&tbm=isch&tbnid=xdzIoRoGcKhm0M:&imgrefurl=http://www.airsoftmegastore.com/2283-MP002C-AGM-Metal-Bolt-Action-Type-96-Airsoft-Sniper-Rifle-OD-Green-NEW-ENHANCED-2012-MK96.aspx&docid=1OxVpxenkM8HIM&imgurl=http://static1.airsoftmegastore.com/ImageCache/Products2283-500x333-67198.jpg&w=500&h=333&ei=SsQuUMqzGZT8yAHZ1ICABw&zoom=1&iact=hc&vpx=604&vpy=161&dur=1354&hovh=183&hovw=275&tx=150&ty=85&sig=113250377536163245590&page=4&tbnh=107&tbnw=160&start=53&ndsp=19&ved=1t:429,r:3,s:53,i:255

    Do you see how they differ?


    EDIT... The reciever, cylinder, piston, triggerbox, hopup, outer barrel and mags, are different than the UTG. They only both have an L96 stock. The AGM is actually exactly the same as the M24 Supermagnum here...
    [​IMG]
    http://www.vandykerifles.com/tactical-supermag-338.htm#bill
     
    Last edited: Aug 17, 2012
  9. ncore

    ncore New Member

    1,064
    0
    Pittsburgh
    im just going to stfu now lol
     
  10. bloobf

    bloobf New Member

    8
    0
    Will 1" UTG weaver rings fit onto the AGM L96 AWP rails? Because so far they don't on the WELL
     
  11. Ranger

    Ranger New Member

    764
    0
    Onsted
    If your asking will the scope rings fit the rail. They should, I cant see why not. I know that some rails are skinnier than others. I think I might have had to cover the rail where the scope rings are for a spacer and it made it tight. It might be one of the ones thats thinner. I'm not at home to check right now. I can pm you in about 20 minutes and let you know.
     
  12. brockolson97

    brockolson97 New Member

    172
    0
    Superior, Wisconsin
    sorry bro, those scope rings wont work, the agm's rails on their sniper are at a little different angle than other rails, what you need is a picatiny and weaver rail opptional scope ring
     
  13. Ranger

    Ranger New Member

    764
    0
    Onsted
    They all use the Weaver/Picatinny rails. Pellet rifles use Dovetails. Not to mention he did say the rings were Weaver, so I bet Weaver style rings will fit onto a Weaver style rail. I have the Agm feet from me, that has standard Weaver style rails. Just some companies have crappy molds to start with so they are a few mm's thinner. I have had to use tape over the spot I was going to mount my rings so it would'nt wiggle any. Jls scar's had a crappy thinner weaver rail also.