Airsoft mortar

Discussion in 'Miscellaneous Weaponry' started by airsoftbum1578, Nov 18, 2012.

  1. airsoftbum1578

    airsoftbum1578 New Member

    21
    0
    If you find and airsoft mortar, please leave a link below. Im looking for something special, that you wont see everyday at your local airsoft park. Thanks!
     
  2. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor

  3. Masonicrat

    Masonicrat Member

    607
    0
    New London
  4. Dead Eye

    Dead Eye New Member

    473
    0
    Ocala
  5. marine121496

    marine121496 Wahahaha~ Supporting Member

    7,506
    2
    Ann Arbor
    OP didn't state any sort of restrictions, so I didn't search for anything with restrictions.
     
  6. deathmonkey_352

    deathmonkey_352 New Member

    75
    0
    I think I figured out how to build one

    Parts list

    Toypedo pool toy

    12 gram co2

    PVC and end cap

    1 1/4 inch screw

    First take the screw and grind it into a point leaving about a 1/2 inch of thread left and screw it into the center of the end cap

    Second take the toypedo and cut the back off 1/4 away from the end of the stabilizing fins, this exposes a tight hollow tube where you put the co2

    Third glue the PVC tube into the end cap fill with 3 inches of water

    How to use

    Slam the toypedo round down the tube and watch it fly
     
  7. WadiyanAirsoft

    WadiyanAirsoft New Member

    114
    0
    Tyler
    U can just buy one from evike for about 116$ and it looks cool