Airsoftgi g4-a5 dune knight vs cobate machine m4

Discussion in 'Electric Guns' started by airsoftguykwa, Aug 15, 2012.

  1. airsoftguykwa

    airsoftguykwa New Member

    116
    0
    Which is better and better for the price. And I like rails but with the g4 I will have to mount my big batteries on the side of the crane stock but with the machine it will have no rails but a spot for the batterie so help and is there pros and cons to both please list
     
  2. Maxuhmize

    Maxuhmize Active Member

    5,460
    0
    OKC
    In my opinion, the g4 customs are a waste of money. If your willing to drop that much on a combat machine, don't. Get either a G&P, ICS, or VFC.
     

  3. mockingshot

    mockingshot New Member

    1,695
    0
    It's a g&g cm vs a externally charmed g&g cm.
     
  4. airsoftguykwa

    airsoftguykwa New Member

    116
    0
    Ok my price range is around 180-200
    And I need a good quilty m4
     
  5. mockingshot

    mockingshot New Member

    1,695
    0
    JG interest you? Sr16, SR25, or echo 1.
     
  6. airsoftguykwa

    airsoftguykwa New Member

    116
    0
    I's the s system full metal jg good or bad
     
  7. Maxuhmize

    Maxuhmize Active Member

    5,460
    0
    OKC
    I haven't heard much about the full metal one but I know the plastic ones are good. But ics's mr4 s systems are better then jg's.
     
  8. mockingshot

    mockingshot New Member

    1,695
    0
    Same gearbox with little differences it looks like. If you want to pay$60 for full metal its fine. But for 30$ more you can get a G&P M4.
     
  9. airsoftguykwa

    airsoftguykwa New Member

    116
    0
    Can you put a link please to this m4 you say
     
  10. ShooterMcgavin

    ShooterMcgavin New Member

    650
    0
    New Port News
  11. airsoftguykwa

    airsoftguykwa New Member

    116
    0
  12. airsoftguykwa

    airsoftguykwa New Member

    116
    0
    I just got my friends jg g36c and I need to upgrade because he downgraded for cqb I would
    Like to get like 400 fps with out opening the gearbox so please help
     
  13. Pashto

    Pashto New Member

    174
    0
    Mechanicsburg
    You won't be able to get it to 400 without changing the spring. You don't necessarily need to if it's close to 350. You could get by with a better bucking. A tightbore barrel (6.03) would add a little bit of fps but probably not enough for 400.
     
  14. airsoftguykwa

    airsoftguykwa New Member

    116
    0
    Wat about a 6.01 barrel
     
  15. Maxuhmize

    Maxuhmize Active Member

    5,460
    0
    OKC
    6.01 is to small and doesn't give the bb enough surrounding air or something like that. Go with a 6.03