Apex R5 M12 Gen2 MOSFET Help

Discussion in 'Electric Guns' started by therealpenguino, Feb 11, 2016.

  1. therealpenguino

    therealpenguino New Member

    1
    0
    Hermitage
    Ok, so I just bought the Apex R5 M12 Gen2 and it performs great. However I am a bit confused on the pre-installed MOSFET. I play almost exclusively on semi and I am wondering if it will protect the trigger contacts from burning out. It is in-line, but i don't know if it is soldered to the contacts or what. I have read that the installed MOSFET should protect the trigger contacts, but I am still uncertain. If anyone had any experience with this specific gun (Or did some research) I would be grateful.

    Thanks
     
  2. ma_airsoft

    ma_airsoft Well-Known Member Supporting Member

    1,200
    72
    it should be fine to protect your trigger contacts. It's wired in, not just a little plug in one. There shouldn't be an issue