Archer's Impression Thread

Discussion in 'Clothing / Gear' started by Archer627, Oct 15, 2012.

  1. Archer627

    Archer627 New Member

    6,174
    5
    Figgington
    After much deliberation and consulting with Grin, I have come to the conclusion that I'm going to do a NSW Impression. Instead of hijacking the heck out of Grin's thread, I figured it's time I made my own (LOL).

    First off, I'm just going to throw this out there. I know it's going to cost a lot of money. I am determined to get this thrown together and looking like the real deal. As of now, the kit itself is probably going to cost in upwards of 3,000 USD and the weapons (all GBBs tuned by yours truly) will most likely push that up 2,000 USD more. The era I'm going for is around 2011-2012(I think that's the era Grin and I are going for?). Now that we have that out of the way, let's get into the good stuff.

    ----------

    Headgear:

    • Ops Core Ballistic FAST Helmet w/ rails and VAS shroud (Desert Digital)
    • Some Hook and Loop Pile for the helmet (Khaki)
    • S&S Precision Manta Strobe (IR) and mounted up top
    • S&S Precision V-Lites (Blue, strobe and constant) mounted on either side
    • Princeton Tec Charge MPLS (Tan, Red/Blue/IR) on left ARC Rail
    • IFF Flag patches on either side (IR Reflective)
    • Blood Type Patch above the Flag patches
    • Smith Optics Boogie Goggles mounted onto Velcro in rear (Tan)
    • Contour Camera on right side (Paint AOR1)
    • Counter Weight for NODs w/ battery tray-only if I get real NODs. (AOR1)
    • Wilcox G24 Arm (Tan) -only if I get real NODs.
    • MSA Sordins/Dual Comms (OD)
    • SOG Recon Wrap or a balaclava (Khaki)

    1st Line/General Clothing:

    • Toysoldier Navy Custom Combat Set (AOR1 and 2)
    • Merrell Sawtooth Boots
    • Oakley SI Assault Gloves (Khaki)
    • G-Code XST Drop Leg w/ RTI for P226 (Tan color)
    • Two Pistol Mag pouches on belt on left side (AOR1)
    • Retention Lanyard
    • HSGI Riggers belt (Khaki)
    • IFF Reversed Flag Patch on right shoulder
    • IFF Flag Patch on left shoulder
    • Team Patch on left shoulder
    • NO PEN patch on right shoulder
    • NO PEN Wristband


    2nd Line:

    • Toysoldier 6094A (AOR1)
    • Toysoldier Kangaroo SMG Mag Pouch
    • US Tactical Sewing FAP (AOR1)
    • US Tactical Sewing Slap Charge pouch (AOR1)
    • CAT on right side cummerbund w/ pouch
    • US Tactical Sewing Admin Pouch
    • Source 2L Bladder
    • Two Radios in the both mag pouches on the cummerbund
    • Antennas out the back for both(flexi ones)
    • Toysoldier Small Utility Pouch by CAT (AOR1) For Thunder B's:p


    Blasters:)

    -KWA MP7
    • RA Tech NPAS
    • Dytac MP7 Suppressor w/ three prong flash hider
    • Threaded adapter for MP7
    • New bucking
    • 6.03mm TBB
    • Aimpoint T1 Micro w/ Riser Replica
    • Working Replica PEQ15
    • Element M3X Light
    • Element Dual Pressure switch
    • Various Reliability Mods
    • 5 Extended mags (4 in carrier, one in gun)
    • US Tactical Sewing Fast Attack Sling
    • MP7 Sling adapters

    -KJW P226
    • Guarder Navy MBK
    • Non-threaded Outer barrel
    • Enhanced Spring Set(hammer, recoil, etc.)
    • Reliability Mods
     
    Last edited: Oct 15, 2012
  2. Urbanprodigy

    Urbanprodigy New Member

    808
    0
    I will wait for you to finish then run away with it all! :p Sounds amazing I really want to see it finished
     

  3. glenlovesm4

    glenlovesm4 New Member

    2,522
    0
    Knoxville
    I'm excited to see how this turns out. OP when will you start purchasing these items.
     
  4. Archer627

    Archer627 New Member

    6,174
    5
    Figgington
    I'm hoping to have completed this within mid 2014.
     
  5. glenlovesm4

    glenlovesm4 New Member

    2,522
    0
    Knoxville
    I'm going to need a job to even think about doing an impression.

    EDIT: What eye protection will you be using?
     
    Last edited: Oct 15, 2012
  6. Archer627

    Archer627 New Member

    6,174
    5
    Figgington
    Me too. Luckily I'll be getting Army(or drill?) pay if I pass basic this summer. :)
     
  7. glenlovesm4

    glenlovesm4 New Member

    2,522
    0
    Knoxville
    That's cool. Going into the Army, but at the same time doing a SEAL impression....
     
  8. Grin

    Grin New Member Lifetime Supporter

    5,399
    0
    Irvine
    If we keep at this rate everyone that can afford on this forum it will be doing an NSW impression! Instead of every thread being a "Should I buy Condor/Voodoo/NCStar/InsertCheapBrandHere plate carrier/chest rig?", it'll all be " New Impression!"...

    Actually, if everyone was doing worthwhile impressions it wouldn't be too bad...
     
  9. Havok17

    Havok17 New Member

    1,107
    0
    Chicago
    Can't wait to see this complete! Sounds like it will be great.
     
  10. Batman

    Batman New Member

    1,554
    0
    Wichita
    Switch T-1 for XPS please. Actually you don't have to, but now you know my opinion.
     
  11. Archer627

    Archer627 New Member

    6,174
    5
    Figgington
    An XPS is going to be on my 416. I like the T1 Micro better on the MP7 anyways...
     
  12. Batman

    Batman New Member

    1,554
    0
    Wichita
    Well whenever I have seen an mp7 pimped out 1337 operator style there has always been an XPS.
     
  13. Grin

    Grin New Member Lifetime Supporter

    5,399
    0
    Irvine
    Then you have not looked hard enough, my friend.

    [​IMG]

    [​IMG]

    This was just a quick 1-minute google search ;P
     
  14. Knief

    Knief Moderator Staff Member

    13,849
    3
    Ann Arbor
    Nothing to add right now other than a vote for T1 hotness. Just want to make sure I follow your progress.
     
  15. Batman

    Batman New Member

    1,554
    0
    Wichita
    Ok, ok, alright. You win.
     
  16. Archer627

    Archer627 New Member

    6,174
    5
    Figgington
    Working on getting a set of Sordins in a trade right now... I really hope I can seal the deal. Just noticed I left off the PTTs.
     
  17. Shadow_Nugz

    Shadow_Nugz New Member

    2,255
    0
    Sioux City
    I feel stupid asking it but what does NSW stand for? Since you're using a Sig 226 and AOR1 I wanna say it is Navy Special Warfare?
     
  18. Knief

    Knief Moderator Staff Member

    13,849
    3
    Ann Arbor
    Yep, Naval Special Warfare. It includes SEAL Teams 1-5, 7, 8, and 10, SWCC, SDVT, UDT, their support staff, and probably some others I'm forgetting. NSWIntelguy would be able to break it all down for us if he sees this thread.
     
    Last edited: Oct 16, 2012
  19. Grin

    Grin New Member Lifetime Supporter

    5,399
    0
    Irvine
    EOD is a part of it as well.
     
  20. Batman

    Batman New Member

    1,554
    0
    Wichita
    SWCC still uses M81 no?