Army Spec Ops/Civil Affairs/PMC Loadout Help?

Discussion in 'Clothing / Gear' started by BravoZulu, Aug 17, 2012.

  1. BravoZulu

    BravoZulu New Member

    18
    0
    Hey guys. I'm trying to replicate an Army Spec Ops (Civil Affairs) or maybe even a PMC loadout. Call it what you want, but essentially, what is going to be shown in the pictures below. I have no price range in mind, so whatever is most accurate works. Anyway, here's what I'm going for (Note: I don't take any credit for these):

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    I'm going with the KJW M4A1 for the M4, the rest are up for debate. Help me out, guys?

    EDIT: http://nerdpride-crazychildren.blogspot.com/2009/05/incoming.html

    Source of pictures.
     
    Last edited: Aug 18, 2012
  2. TheCaptainAlmighty

    TheCaptainAlmighty New Member

    547
    0
    Gallifrey
    Well you need DCU'S, desert combat boots, Alta Knee pads, Safariland 6004 drop leg holster, any black drop leg pouch on the other side, and a CSM Gear Fanny Pack. Any roll up dump pouch, and black riggers belt. EDIT: His backpack is also an Eagle Industries MAP Pack.

    Can you please link to where you found these pictures?
     

  3. BravoZulu

    BravoZulu New Member

    18
    0
    Thanks for the help, Cap'n. I'll look into these products, see the original post for the link.

    Edit: Might get a King Arms M4 instead. Anyone have any experience with either?
     
    Last edited: Aug 18, 2012
  4. TheCaptainAlmighty

    TheCaptainAlmighty New Member

    547
    0
    Gallifrey
    Go with an AEG. GBBR's don't work well in the cold, and you could get a great gun with extra mags and accessories, rather than paying $40 a mag.
     
  5. TheCaptainAlmighty

    TheCaptainAlmighty New Member

    547
    0
    Gallifrey
    AH HA! Its an RRV with backplate!

    EDIT: Here's what someone ordered recently, of an RRV. You'll want everything the same, except the sling in Black. Or you can change the pouches around, to match the figure perfectly.


    And this:http://www.shootercbgear.com/product_info.php?cPath=22_50_51_95&products_id=966

    He also has a shemagh. I have one, and they're great:http://www.amazon.com/Premium-Shema...e=UTF8&qid=1345275975&sr=8-3&keywords=shemagh
     
    Last edited: Aug 18, 2012
  6. Knief

    Knief Moderator Staff Member

    13,849
    3
    Ann Arbor
    Slight changes to The Captain's post. You need three of these:

    http://www.shootercbgear.com/product_info.php?cPath=22_50_80_98&products_id=4368

    He has an M60 pouch (http://www.shootercbgear.com/product_info.php?cPath=22_50_80_98&products_id=741) under his right arm, which doesn't really make sense. I'd go with an IFAK instead:

    http://www.shootercbgear.com/product_info.php?cPath=22_50_80_99&products_id=849

    He also has 4 40mm grenade pouches on his chest instead of the admin panel. These aren't a perfect match, but they'll do:

    http://www.shootercbgear.com/product_info.php?cPath=22_50_80_99&products_id=732

    And instead of that horizontal utility pouch, you need a fanny pack. This isn't a perfect match, but it would do:

    http://www.shootercbgear.com/product_info.php?cPath=22_50_75&products_id=4315
     
  7. BravoZulu

    BravoZulu New Member

    18
    0
    Thank you to the both of you for helping with IDing this stuff, I intend to post pictures of the finished product once I get to work on actually setting it up. Might switch out the sunglasses/headband combo for a savephace/backwards milspec monkey "Cool Guy" cap. Subtracts from the milsim aspect, but I'd rather not get shot in the face.
     
  8. TheCaptainAlmighty

    TheCaptainAlmighty New Member

    547
    0
    Gallifrey
    Knief, I understood that the pouches were kind of wrong, I was quoting Shootermcgavin because when I read his post earlier and looked at what he got, and then finding out that this figure had an RRV, I realized they were very similar. The OP also seemed intelligent enough to be able to find these pouches on his own.