Separate names with a comma.
Discussion in 'Electric Guns' started by mvsrocks, Sep 14, 2012.
It seemed fine. I'll recheck. I have a separate gear set, but don't have any more bevels
is it your spur gear or bevel gear breaking? if it's your spur, look for grind marks underneath the spur on the gearbox. if there are scuff marks on one section of the gearbox, then your axle alignment is off or you have a bad set of gears.
It is the bevel that is breaking, but at the place where it meshes with the spur. Also, I realized that the first SHS bevel was a Gen 2, but idk why the other two SHS bevels stripped. Here's the place where I purchased them: