body pin stock

Discussion in 'General Airsoft Discussion' started by Tony123lol, Jul 27, 2021.

  1. Tony123lol

    Tony123lol New Member

    5
    0
    dallas
    that body pin is stuck and i don’t what to do
     

  2. Tony123lol

    Tony123lol New Member

    5
    0
    dallas
  3. Guges Mk3

    Guges Mk3 Administrator Staff Member Administrator Supporting Member Lifetime Supporter

    7,988
    4,576
    Minneapolis
    One side is tapered. Tap it out the side that "isn't" tapered.
     
  4. Tony123lol

    Tony123lol New Member

    5
    0
    dallas
    i already tried both sides but both of them still stuck
     
  5. Guges Mk3

    Guges Mk3 Administrator Staff Member Administrator Supporting Member Lifetime Supporter

    7,988
    4,576
    Minneapolis
    Neither side is tapered, but it's stuck.

    If the pin is truly not tapered...just use a punch and drive it through...grant that is a real pin and it moves.

    There are dummy pins on some models.

    Is this a Cybergun Colt?
     
  6. aotsukisho

    aotsukisho Well-Known Member

    745
    413
    Something else to try first is to remove the motor grip, rear takedown pin, and buffer tube before punching out the trigger pin. If the lower receiver isn't completely aligned with the gearbox those pieces will apply lateral pressure and friction will make the pin difficult to remove.
     
    hawkchief and Spacemonkey like this.