boneyard

Discussion in 'What Gun Should I Get?' started by Andre4480, Jan 1, 2013.

  1. Andre4480

    Andre4480 New Member

    33
    0
    want to get a m4 case but make ak internals fit what should I do? Get boneyard or by two new guns? And where should I buy from?
     
  2. Finalencounter

    Finalencounter Duke of Penguins Supporting Member

    5,259
    13
    Warrenton
    You want to put a V. 3 GB into an M4 receiver? Why?
     

  3. Andre4480

    Andre4480 New Member

    33
    0
    I don't know I just want a one of a kind gun
     
  4. Leonidas

    Leonidas New Member

    1,442
    0
    Des Moines
    V3 is stronger, and why not?
     
  5. TheAirsoftTech

    TheAirsoftTech New Member

    3,510
    9
    Just radius the V2 if you're worried about strength.m

    EDIT: But, why would you? I mean it wouldn't be to terribly difficult. But it would be a challenge if you're new OP.
     
  6. iZazzil

    iZazzil Active Member

    1,189
    0
    Grapevine
    Its going to have to take EXTREME modification and even then it might not work.
     
  7. Finalencounter

    Finalencounter Duke of Penguins Supporting Member

    5,259
    13
    Warrenton
    I just don't really see the point in it. You could always just get a different GB shell. I have never heard of a JG cracking.

    Seems like it would take quite a bit of modification. Not something a person new to teaching would do.

    Sniped.
     
  8. Andre4480

    Andre4480 New Member

    33
    0
    But do you have any places I could go for a good boneyard
     
  9. iZazzil

    iZazzil Active Member

    1,189
    0
    Grapevine
    Pretty much any airsoft site will have a boneyard.
     
  10. Finalencounter

    Finalencounter Duke of Penguins Supporting Member

    5,259
    13
    Warrenton
    I also don't see why you would buy a boneyard gun for this. You could just buy the receiver.

    But there is always Evike, AS, I think ASGI...
     
  11. Andre4480

    Andre4480 New Member

    33
    0
    Ok but you guy suggested not using the m4 and ak any suggestions to make a one of the kind gun
     
  12. Finalencounter

    Finalencounter Duke of Penguins Supporting Member

    5,259
    13
    Warrenton
    Just get a M4 if that's what you want and upgrade the internals. Don't go trying to fit a version 3 GB into it.
     
  13. Andre4480

    Andre4480 New Member

    33
    0
    Any ideas at all? I want to get things ordered so I will have time to work on it.
     
  14. Andre4480

    Andre4480 New Member

    33
    0
    I like the m4 feel I just want it to be different from everybody on the feild if you know what I mean.
     
  15. iZazzil

    iZazzil Active Member

    1,189
    0
    Grapevine
    M4's are so versatile and you could probably put a RIS on it and a stock or pistol grip and make it your own. Because of how versatile the AR platform is, you could have a gun that no one else has just by changing the externals.
     
  16. Andre4480

    Andre4480 New Member

    33
    0
    I mean like peformace wise and I might do that with the m4
     
  17. iZazzil

    iZazzil Active Member

    1,189
    0
    Grapevine
    Its easy to do the same performance wise because there are a ton of parts out there and you can mix and match them to your hearts content.
     
  18. Andre4480

    Andre4480 New Member

    33
    0
    Ok all in all do you know how much this all would cost
     
  19. iZazzil

    iZazzil Active Member

    1,189
    0
    Grapevine
    It depends on what parts your getting and from where and also it all depends on what your base gun is. For example, if you get a JG M4 (highly recommended) you aren't going to need to replace the gear set. You would need to shim, adjust AoE and throw in a hop-up.
     
  20. Andre4480

    Andre4480 New Member

    33
    0
    I like jing gong and I would want a pew box