ca g36 fireing issues

Discussion in 'Gun Building, Modifications & Repairs' started by WraithsNinja, Dec 6, 2012.

  1. WraithsNinja

    WraithsNinja New Member

    3
    0
    Ok I have a ca g36 that I have been trying to put together it wasn't working when I got it, can't complain it was free, I've replaced cylinder head, air nozzle, tappet plate, spring guide, re shimmed/lubed, and it had decent gears, . I've recently replaced the spring with a m120 put it back together fired on full auto np, cycled a couple shots on simi and the gun shoots then gets stuck half cycled. Wtf, I'm running a 9.6. Any ideas, should I get a mosfet, don't know much about them.