Crane stock won't lock properly.

Discussion in 'General Accessory Discussion' started by Navix_182, Jul 11, 2015.

  1. Navix_182

    Navix_182 New Member

    Okay so yesterday I received my Apex Tactics in the mail. I opened it up and after a few minutes I was outside playing with it. Everything works perfectly except my crane stock. The stock will lock firmly in the first and last settings, but if it is placed somewhere in the middle it will collapse if pressure is applied. I looked at the buffer tube and there is scratches between the holes, like the pin is just scratching it all up. Does anyone know how I can fix this? I just spent a lot of money on this and I don't want to have to replace anything already.

    ImageUploadedByAirsoft Society1436641712.883735.jpg

    ImageUploadedByAirsoft Society1436641770.694717.jpg
  2. Z-man2013

    Z-man2013 New Member

    Remove the stock from the buffer tube, then look through the hold on the tope of the stock. There will be a phillips head screw and you will need to back up until it locks. Also u will need to hold the piece on the adjusting lever while you unscrew it, other wise it will just spin. Hope this helps!!