Airsoft Forum banner

Cyma Bizon High Cap Fix?

653 Views 8 Replies 2 Participants Last post by  Mayday-Mayday
My new bizon mag has an issue. After firing a couple rounds, the winding system unspools completely. Is there a fix to this or should I be winding more/less?
1 - 9 of 9 Posts
Sounds like you aren't winding it correctly.

Are you wining it for 1 minute...if not...that could be your problem. There is a distinctive sound when you wind a hicap properly. Sort of like this:

GO to the 1:45 point and the "noise" is apparent.

Sounds like you aren't winding it correctly.

Are you wining it for 1 minute...if not...that could be your problem. There is a distinctive sound when you wind a hicap properly. Sort of like this:

GO to the 1:45 point and the "noise" is apparent.

yeah that is how i wind it
All the way to the tung, tung, tung sound and then when you fire it, it let's loose?

How mags do you have? Just this one?
All the way to the tung, tung, tung sound and then when you fire it, it let's loose?

How mags do you have? Just this one?
yeah. just one mag as i heard some aren't always as good as others.
Yeah...your tensioner clutch is bad. As soon as the spring moves it's slipping and unwinding.
Yeah...your tensioner clutch is bad. As soon as the spring moves it's slipping and unwinding.
what's a fix for that? how should i replace it?
You can't unless you find a parts supplier or fabricate the defective piece...of which you will need to disassemble and find first.
just gonna go with mid caps then
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top