(Deleted)

Discussion in 'Beginners Forum' started by RandomAirsofter, Nov 17, 2015.

  1. RandomAirsofter

    RandomAirsofter New Member

    16
    0
    ^
     
    Last edited: Nov 14, 2017
  2. Noah_6

    Noah_6 Active Member

    1,045
    8
    Burbank
    Your FPS goal should be at least 15 fps below the field's limit with a tolerance of 2 FPS. To achieve this, you'll need a good quality spring (see link below) and good compression. Compression is your air seal. If you put all your compression parts together (cylinder, cylinder head, air nozzle), block the air nozzle with your thumb and try to push the piston through the cylinder. If you can stop the piston, you have perfect compression. The first compression part that I'd recommend replacing is the air nozzle. The cylinder and head can be sealed together with Teflon tape, which usually works well enough. If you have any further questions, I'm a technician and you'll know right where to find me.

    http://echigoya-airsoft.com/store/i...product&product_id=206&tracking=564a7e79872c3
     
    Last edited: Nov 17, 2015

  3. RandomAirsofter

    RandomAirsofter New Member

    16
    0
    Thanks! I'll be doing this around next week or so!
     
  4. Darth

    Darth New Member

    401
    0
    Fremont
    12v battery? Can you please show us this. I personally have never seen a aeg running on one.
     
  5. Rushin

    Rushin Well-Known Member

    3,920
    32
    Kalamazoo
    I've seen them. They're pretty rare, and they're pretty huge...
     
  6. RandomAirsofter

    RandomAirsofter New Member

    16
    0
    I didn't win that auction, but I do have a picture of the gun if you guys want it.