Airsoft Forum banner
1 - 3 of 21 Posts

· Registered
5 Posts
Discussion Starter · #1 · (Edited)
Hey! My motor just burnt up and I've been wanting to do a DSG for quite a while. Decided that this would be as good a time as any to do a it.

I am hoping to get 40-65 rps @ 350-400 fps with 11.1v
[edit: inner barrel is a bit over 240mm and is 6.03mm in diameter]

[4/12/22 update: Parts on the way.]


ASG ultimate boost 30k rpm
SHS 16:1 gears
VFC Version 2 ECS Avalon Gearbox
Gate aster [opted for perun v2 hybrid]
(Some people have had issues with the aster's censors,
but with a little tape it shouldn't be a issue)

Matrix Irregular Pitch m120 spring (360~420fps) [S150]

Suggestions/recommendations would be appreciated for:

Piston [SHS 14 tooth]
Piston Head [Real Deal Airsoft piston head]
Cylinder [stock]
Cylinder Head [Stock with plumbers tape]

Any and all other suggestions are appreciated! Thanks in advance! :)
1 - 3 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.