Echo 1 M249 para gears

Discussion in 'Gun Building, Modifications & Repairs' started by Txmxbarajas, Sep 6, 2012.

  1. Txmxbarajas

    Txmxbarajas New Member

    3
    0
    I'm planning on putting an m140 spring in my echo 1 para. Everything in it is stock and I was wondering if the stock gears and piston would be able to handle an m140.
     
  2. CoppertopNeasg

    CoppertopNeasg New Member

    1,440
    2
    Boston
    Probably not depending on your shimming, aoe correction, motor, battery and how you use the gun. If you want to run an m 140 you should get a SHS 15 tooth piston, SHS 18:1 gears and a lonex orange high tourque and the normal 16 awg, MOSFET, deans, 11.1 35c+ set up.
     
    Last edited: Sep 6, 2012