Externals for my M4

Discussion in 'General Accessory Discussion' started by Shadow_Nugz, Sep 7, 2012.

  1. Shadow_Nugz

    Shadow_Nugz New Member

    2,255
    0
    Sioux City
    I have decided I am sticking with my M4 S System and I am just going to pimp it up the wazoo and hopefully be able to transfer the parts to my next gun.

    So far this is what I have decided on:

    TMC PEQ-15
    http://www.ebairsoft.com/anpeq15-battery-case-with-laser-sight-p-6014.html

    Aimpoint replica(decided on an Aimpoint style over an Eotech)
    http://www.shootercbgear.com/product_info.php?cPath=26_45&products_id=44

    Element grip
    http://www.airsoftpark.com/product_info.php?products_id=10109

    This crane stock
    http://www.ebairsoft.com/multi-purpose-buttstock-with-sling-swivel-p-4251.html

    Still stuck between this STANAG
    http://www.evike.com/product_info.php?cPath=23_56_439&products_id=28790

    And this PMag
    http://shop.ehobbyasia.com/beta-project-pts-pmag-75rd-for-m4-aeg-black-abs.html

    Unless anyone has any suggestions of similarly priced pieces?


    Also what batteries can work with my JG? I have looked around but can't figure anything out. Would a larger battery work for me?
     
  2. alex

    alex New Member

    4,794
    4
    Atlanta
    start looking at specs for the 7.4v Lipo's...
     

  3. ShooterMcgavin

    ShooterMcgavin New Member

    650
    0
    New Port News
    MMM maybe he is running it the rear using the crane stock?

    I would recommend ordering from the same place to save on shipping and make it less complicated.
     
  4. Shadow_Nugz

    Shadow_Nugz New Member

    2,255
    0
    Sioux City
    Currently I am running up front but it doesn't fit well so I might got with a per battery.

    I am lookin to buy as much as possible from ebairsoft
     
  5. ShooterMcgavin

    ShooterMcgavin New Member

    650
    0
    New Port News
    http://www.ebairsoft.com/navy-seal-peq15-dummy-p-5821.htmlI would just get the dummy since the laser on the one you linked probably isnt powerful enough to be usefull.

    http://www.ebairsoft.com/1x32mm-scope-cantilever-mount-p-51.html I believe this is the same one you should also look into Micro aimpoints and look at Ttigers sale thread on airsoft forum that has his sites.

    http://www.ebairsoft.com/magpul-grip-genuine-magpul-p-1841.html very comfy grip I love mine.

    http://www.ebairsoft.com/multi-purpose-buttstock-with-sling-swivel-p-4251.html Not sure on this but I guess its fine. Never heard of the company

    I have heard pretty good things about the Beta project Pmags though externally not the best they are good enough for airsoft and feed well. I dont know about the Stanag mag, no clue who makes it, if you can look into getting some MAG Metal mids or their plastic mids. Really comes down to what you prefer

    http://www.hobbyking.com/hobbyking/store/__17295__Turnigy_nano_tech_1800mah_2S_25_50C_Lipo_AIRSOFT_Pack.html

    This should fit in the PEQ box.
    http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=7028
    charger

    http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6697

    http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=20968
    power supply for charger
     
    Last edited: Sep 7, 2012
  6. Shadow_Nugz

    Shadow_Nugz New Member

    2,255
    0
    Sioux City
    Could you explain those last few links concerning the battery and charger?

    And if I have a PEQ box I don't want a laser as well...
     
  7. ShooterMcgavin

    ShooterMcgavin New Member

    650
    0
    New Port News
    The last links are a setup to get a 7.4v lipo with a high discharge rate.

    If your going to get a PEQ with the working laser its worthless if the laser is unusable
     
  8. Shadow_Nugz

    Shadow_Nugz New Member

    2,255
    0
    Sioux City
    High discharge rate? Sorry. I did some research but obviously not enough
     
  9. Username94

    Username94 New Member

    2,718
    0
    New York City
    With lipos you need a balance charger. Also different 7.4 lipos have different discharge rates.
     
  10. Shadow_Nugz

    Shadow_Nugz New Member

    2,255
    0
    Sioux City
    What does said discharge rate mean to me?
     
  11. DaveRuination

    DaveRuination New Member

    2,435
    0
    Alhambra
  12. VTMZ

    VTMZ New Member

    1,510
    0
    Paducah
    Eww, MagPul. MagPul isn't at all unique. I'd want my M4 to have unique externals than to have MagPul which everyone has.
     
  13. Havok17

    Havok17 New Member

    1,107
    0
    Chicago
    You can't overdue Magpul. I run the MOE stock on my M4 but thats as much Magpul as I'll go.
     
  14. alex

    alex New Member

    4,794
    4
    Atlanta
    not everyone has magpul. have you seen the price on their stocks? but everyone has magpul clones... LoL
     
  15. Shadow_Nugz

    Shadow_Nugz New Member

    2,255
    0
    Sioux City
    I already have a Magpul VFG actually. It is nice but I need some rail covers
     
  16. VTMZ

    VTMZ New Member

    1,510
    0
    Paducah
  17. IHOP

    IHOP New Member

    5,426
    2
    Rockton
    Ha. Unique externals on an M4. What is this? the jokes thread?

    Anyway...

    Another way to explain lipos discharge, mah, and voltage would be like G36Fanatic (iirc) explained it once:
    Think of it like a water gun. The mAh is the amount of water in the tank. The voltage is the pressure of the water, and the discharge rate (C) is the size of the nozzle it shoots through. The bigger the nozzle (in this case, discharge), the more power it discharges at once.
     
  18. Shadow_Nugz

    Shadow_Nugz New Member

    2,255
    0
    Sioux City
    New question! I want to replace the gas block on my S System with a low profile version (I want to get a set of MBUS sights to replace the integrated sights). The main thing I am concerned about is that the gas block has 2 screws that sit on notches on the barrel. Any help?