f2000 won't feed highcaps

Discussion in 'Gun Building, Modifications & Repairs' started by siegingpanda, Oct 6, 2012.

  1. siegingpanda

    siegingpanda New Member

    100
    0
    seattle
    My g&g f2000 won't feed ANY highcaps I've tried g&g h
    Highcaps and snots highcaps they all feed the first bb and none of the rest. Any suggestions? Thanks
     
  2. airsoftplayer14

    airsoftplayer14 New Member

    913
    0
    Check your hop up because it may be bent or try pushing your mag forward
     

  3. siegingpanda

    siegingpanda New Member

    100
    0
    seattle
    Yea... Still it won't feed. Thanks anyways
     
  4. airsoftplayer14

    airsoftplayer14 New Member

    913
    0
    So you are using brand new mags?
     
  5. siegingpanda

    siegingpanda New Member

    100
    0
    seattle
    Yes I'm using 3 month old highcap
     
  6. airsoftplayer14

    airsoftplayer14 New Member

    913
    0
    Have you sprayed silicone in the mag and you should also clean out your mag as well. Another thing you can try is to load up your mag with bbs, wind it up fully and then release all the bbs by sliding a switch on top of the mag that will release all of the bbs at once. If the dont come flying out of the mag your mag is most likely the problem. Tell me if this works or not. Thanks
     
  7. sandtiger

    sandtiger New Member

    124
    0
    Yes please do tell if it's a mag problem
     
  8. brokenarrow

    brokenarrow Active Member

    5,862
    19
    Meadville
    I have this problem with my M4, with ANY magazine
     
  9. siegingpanda

    siegingpanda New Member

    100
    0
    seattle
    ok so after a few days of tinkinering i have found it isnt the mags but someting wrong with the gun itself ive tried EVERYTHING. hop up is lined up air nozzle is at propper seated position.idk but now the mags wont stay in the magwell it just keeps sliding out with little force and will not feed.:{
     
  10. airsoftplayer14

    airsoftplayer14 New Member

    913
    0
    Ok then you mag release spring could be cery weak
     
  11. airsoftplayer14

    airsoftplayer14 New Member

    913
    0
    Sorry about that what is was triyong to say os that your mag release spring could be very weak which is why it isn't holding the mags in. Another reason why its not holding the mags in is because the mag release is just worn out. Also how old is your gun?
     
  12. airsoftplayer14

    airsoftplayer14 New Member

    913
    0
    Trying* and *is not os. I just woke up and its hard to type o. An Iphone really sorry about that
     
  13. brokenarrow

    brokenarrow Active Member

    5,862
    19
    Meadville
    There might be a bur in the hopup, check it with a flashlight and pm me if you see one, I'll tell I what to do
     
  14. airsoftplayer14

    airsoftplayer14 New Member

    913
    0
    I have already suggested that do him.
     
  15. Shiftyshooter

    Shiftyshooter Learn from your mistakes. Lifetime Supporter

    10,227
    14
    Prague
    So Why not just use mid-caps?

    So, after reading the thread I have some things to say. Check if the magazine catch actually works.
     
  16. airsoftplayer14

    airsoftplayer14 New Member

    913
    0
    I have already suggested for him to check even if the mags works
     
  17. Shiftyshooter

    Shiftyshooter Learn from your mistakes. Lifetime Supporter

    10,227
    14
    Prague
    i know the GGs have problems with feeding from different magazines. Does the one you got with the gun work?
     
  18. TornadoAirsoft

    TornadoAirsoft New Member

    151
    0
    Maybe this will work if one of your buddies has a Scar L. Try the Scar L mags because they are thinner than your standard M4 Mags. Try them.
     
  19. siegingpanda

    siegingpanda New Member

    100
    0
    seattle
    I think it's the mag release I'll post a video tomorrow explaing it in greater detail.
     
  20. siegingpanda

    siegingpanda New Member

    100
    0
    seattle
    Oh and shifty. No the one that came with the gun doesn't work