Finalencounter's build thread

Discussion in 'Gun Building, Modifications & Repairs' started by Finalencounter, Oct 18, 2012.

  1. Finalencounter

    Finalencounter Duke of Penguins Supporting Member

    5,239
    0
    Warrenton
    So, I plan on doing a new build. Basically replacing everything internally. Not really trying to have it for a specific use (High ROF build, Long range, high FPS), basically a good gun over all. I have picked out a base model I would like to get and have a parts list put together.

    I would like your opinions on these and tell me what you think would be good. On top of this list I plan on POSSIBLY getting one of the Prommy + r-hop barrels from Clandestine.

    Base gun - A&K SPC MOD1 - http://www.airsoftgi.com/product_info.php?cPath=139_24_164&products_id=3169

    Here is my parts list:

    16ga wire - http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_27&produc ts_id=158
    Lonex A1 - http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_6_10&prod ucts_id=269
    Lonex motor brushes - http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_27&produc ts_id=249
    Lonex O-ring nozzlehttp://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_6_14&prod ucts_id=137
    Lonex red 10 tooth piston - http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_6_8&produ cts_id=150
    Sorbo - http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_6_18&prod ucts_id=176
    Lonex 16:1 - http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_6_30_38&p roducts_id=222
    SHS shims - http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_6_26&prod ucts_id=6
    Nanofet MOSFET - http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_27&produc ts_id=246
    Deans - http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_27&produc ts_id=95

    No bushings because it comes with metal ones.
    I am thinking of moving up to lipos, so I was wondering if this could handle a 11.1v lipo? I kinda planned on using a 7.4v *cough*RCV*cough* but im open to ideas. Right now I just run a 9.6v.

    As of now, I don't plan on messing with anything externally. Let me know what you guys think.
    Also, could you estimate a re-sale value to this?

    Thanks,
    FE
     
  2. RCV

    RCV New Member

    2,852
    0
    I'd say just get a nice m4 right away. It will sell better and it's only about $60 more. I'd go for a VFC or CA. Your links aren't working but I see you mentioned motor brushes. Lolwutwhy. Looks good otherwise. Take your time.
     

  3. Finalencounter

    Finalencounter Duke of Penguins Supporting Member

    5,239
    0
    Warrenton
    I just want a custom M4 pretty much.
    The motor brushes, I wasn't sure about those, I thought it would just keep me from having to solder the wire onto the motor.
     
  4. BlueReaper46

    BlueReaper46 New Member

    766
    0
    Your links are not working properly, the link is cut off at the end in all of them(there is a space in it for some reason)
     
  5. S0m3_0n3

    S0m3_0n3 New Member

    256
    0
    nope, the brushes have nothing to do with soldering the wire, if you want the removable clip type pieces you'll need some of these http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_27&products_id=140

    or Part 69525K59 from McMaster-carr
     
    Last edited: Oct 19, 2012
  6. Finalencounter

    Finalencounter Duke of Penguins Supporting Member

    5,239
    0
    Warrenton
    Gotcha.

    Here, lets try this again:
    Piston - http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_6_8&products_id=150
    Shims-http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_6_26&products_id=6
    Cylinder head-http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_6_19&products_id=45
    Gears-http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_6_30_38&products_id=222
    Motor-http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_6_10&products_id=269
    Nozzle-http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_6_14&products_id=137
    Sorbo-http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_6_18&products_id=176
    Fet-http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_27&products_id=246
    Wire-http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_27&products_id=158
    Deans-http://clandestineairsoft.com/index.php?main_page=product_info&cPath=1_27&products_id=95
     
  7. S0m3_0n3

    S0m3_0n3 New Member

    256
    0
    your links don't seem to be working still, are you going to upgrade the piston head?, but you should be able to easily run an 11.1 lipo in that, just make sure you shim properly and adjust AOE
     
  8. Lefse

    Lefse Well-Known Member Supporting Member

    4,748
    162
    I highly recommend you solder the wires to the motor, more reliable and less resistance. Other than that your parts list looks good, can't go wrong with Lonex. It should do 35ish rps with an 11,1v li-po pulling an M120, with an M110 there's a risk of PME.
     
    Last edited: Oct 19, 2012
  9. spazzticsmurff

    spazzticsmurff Member

    677
    0
    phoenix
    everything in your list looks pretty decent. the only thing i would like to say, is that, just because it says that the gb has metal bushings installed doesnt mean that they dont need to be replaced. the g&g combat machine comes with metal bushings, but they are made of bronze and they are horable, i have the replace them in evey cm i work on. so be aware that if they arent at least made of steel then you will need to replace them anyways.
     
  10. Finalencounter

    Finalencounter Duke of Penguins Supporting Member

    5,239
    0
    Warrenton
    Are you on the mobile?
    I don't know.
    Okay, I'm pretty good at shimming, and I will be positive to correct the AoE.
    Okay, sounds good.
    Thanks for the input, I'll be sure to look into that.
     
  11. S0m3_0n3

    S0m3_0n3 New Member

    256
    0
    nope, not on mobile, I tried copying the link, and got a %20 in between prod and ucts like this "pro%20ducts"
     
  12. Finalencounter

    Finalencounter Duke of Penguins Supporting Member

    5,239
    0
    Warrenton
    That's odd, it worked for me and others...
    Anyways, this has been put on the back burner. I'll revive it when I get the funds again. Had to chip in to get a metal rod put into my arm...