Free play on stock

Discussion in 'Beginners Forum' started by VtecBoy, Oct 1, 2012.

  1. VtecBoy

    VtecBoy New Member

    4
    0
    Kailua Kona
    My stock has free play to it, I can move it back and forth is there a way to tighten it? Pic shows the problem
     

    Attached Files:

  2. backyardsn1per

    backyardsn1per New Member

    156
    0
    Fennimore
    Take off the stock, remove the end cap and tighten the big screw.
     

  3. Archer627

    Archer627 New Member

    6,174
    5
    Figgington
    First, thread the stock but back onto the stock tube. Next, take the actual stock off by pushing the button and extending it to the end. Now, pull down on the push button(pull the long end down and away from the stock itself) and pull the stock off simultaneously. There may or may not be a cover on the end of the buffer tube. If there is, there's going to be a screw on the bottom. Take it out. Pull the cover off. Now, there should be a screw down on the inside of the buffer tube. Get a screw driver and tighten it. Now reverse the steps I just listed to put it back together. Once back together, thread the buffer tube nut towards the receiver to tighten even more.
     
  4. VtecBoy

    VtecBoy New Member

    4
    0
    Kailua Kona
    Thanks I found the screw I just removed the battery and it was there.
     

    Attached Files:

  5. pinggoy

    pinggoy New Member

    15
    0
    west palm beach
    awsome not go and rack some kills.