g and g blow back cm

Discussion in 'Gun Building, Modifications & Repairs' started by bal1, Oct 6, 2012.

  1. bal1

    bal1 New Member

    1,366
    0
    So before you go on rants about how bad g and g is already know how bad they are,so please keep those style comments to yourself. I bought this gun for fifty dollars and right as I got it I put in an ics infinite motor. I was able to get about a hundred fifty rounds through it before it stopped shooting. When I pull the trigger it sounds like it wants to shoot. Also there's a small pin(not a body pin)missing near the trigger will this affect the gun if I take it apart without that pin?
     
  2. Col1500

    Col1500 New Member

    815
    0
    Kent
    The pin missing shouldn't matter, it's just another pin that keeps your gearbox in place. As for the motor, is could be the motor height. Have you tried adjusting it?
     

  3. bal1

    bal1 New Member

    1,366
    0
    Actually I figured it out the current battery I'm using is barely enough to power the motor ,thus the motor uses more power than the battery can deliver,I charged the battery more and now it's shooting just fine.well as fine as a cm can get anyway.
     
  4. Archer627

    Archer627 New Member

    6,174
    5
    Figgington
    You need that pin... It's what holds the gearbox in place... If it's not there, the gearbox will be able to move, which could cause the stripping of your pinion.
     
  5. Col1500

    Col1500 New Member

    815
    0
    Kent
    Awesome, I sort of guessed that but I decided to assume the battery was charged. Well that's what I get I guess lol
     
  6. bal1

    bal1 New Member

    1,366
    0
    The battery doesn't hold much charge at all,so it died muck quicker than I thought.my own stupidity got me again.
     
  7. WaikoloaAirsoft808

    WaikoloaAirsoft808 New Member

    75
    0
    I put a G&P m170 devil motor and a m130 spring and a few more upgrades and my battery has a hard time pulling it so I'm going to get a lipo for it
     
  8. bal1

    bal1 New Member

    1,366
    0
    I bought the gun for my little sister ,so I'm gonna do some cosmetic work, and also the rail on it I can physically turn the rail and barrel left or right without truly forcing it. Can someone tell me how to fix this?
     
  9. Col1500

    Col1500 New Member

    815
    0
    Kent
    There's usually notches on the delta ring that prevent turning, maybe they broke off.
     
  10. bal1

    bal1 New Member

    1,366
    0
    Not the rail itself the entire front of the I can turn left or right.
     
  11. Archer627

    Archer627 New Member

    6,174
    5
    Figgington
    Tighten the delta ring.
     
  12. bal1

    bal1 New Member

    1,366
    0
    Can you tell me how to do that?
     
  13. bal1

    bal1 New Member

    1,366
    0
    This is the gun I've been talking about,as I said previously I bought it for my sister for fifty dollars,the rail has zip ties on it,probably top keep the rail from moving. Also this is what I mean by I can turn the rail.

    ForumRunner_20121007_162038.png



    ForumRunner_20121007_162105.png



    ForumRunner_20121007_162215.png



    ForumRunner_20121007_162156.jpg
     

    Attached Files:

  14. bal1

    bal1 New Member

    1,366
    0
    I'm not so sure if you can tell by the picture but I turned the barrel to the right.
    ForumRunner_20121007_162553.png
     
  15. Col1500

    Col1500 New Member

    815
    0
    Kent
    I'm pretty sure there's a screw at the base of he outer barrel, I think it needs to be tightened. At least I think there is, I haven't looked at outer barrel stuff in a long time.