G&p mag issues

Discussion in 'Electric Guns' started by ShawnB52, Sep 12, 2012.

  1. ShawnB52

    ShawnB52 New Member

    17
    0
    Knoxville
    I've got a G&P Mk14 dmr and I've tried two different types of mags with no success. King arms 110rd plastic mids and mag brand 70rd low profile mids, neither feed consistently. Is there something I can do to the mags or anyone know how to fix this issue?
     
  2. tscebu

    tscebu New Member

    30
    0
    Dayton
    I have used MAG G3 mags and King Arms M4 mags, and I have known both to have problems fitting the magwell width of TM clones. A easy solution that I have done would be to put a little tape around the top of the mags to stop them from wobbling. I use black electrical tape(so it is harder to notice).

    P.S. I've shot a G&P MK14 before. really nice choice. :)
     

  3. ShawnB52

    ShawnB52 New Member

    17
    0
    Knoxville
    Thanks. But the mags fit fine, they just aren't feeding properly.
     
  4. ShooterMcgavin

    ShooterMcgavin New Member

    650
    0
    New Port News
    Does G&P use the G&G M14 system? If it does I think only CA, G&G, and G&P mags will work.
     
  5. pipdaddy7

    pipdaddy7 New Member

    125
    0
    Have you lubed them and broken them in?
     
  6. ShawnB52

    ShawnB52 New Member

    17
    0
    Knoxville
    @shooter- they are tm style mags.

    @pip-lubed them yes. Define broke them in.
     
  7. 703

    703 Active Member

    1,953
    0
    webster
    If they are brand new mags you have to load and unload them a few times to break them in. Also doesn't hurt to add silicone to help lubricate it.