G&P motor clips

Discussion in 'Electric Guns' started by Napple, Oct 15, 2012.

  1. Napple

    Napple New Member

    442
    0
    My g&p has motor hoops that are screwed into the motor instead of normal clips. This being my first aeg like this, i do not know how to handle this. What is the easy way to attach a new motor? Do i have to get completely new wiring? Thanks.
     
    Last edited: Nov 13, 2012
  2. RCV

    RCV New Member

    2,852
    0
    Solder the wires on. It really is the best option.
     

  3. theonlyBuster

    theonlyBuster Active Member Lifetime Supporter

    14,149
    5
    S. Florida
    I prefer the old heat shrink trick.
    Basically connect the bare wire to the motor and use heat shrink tube to ensure it holds.
    It's the cheapest and most effective method.

    Soldering would be my last resort.
     
  4. Col1500

    Col1500 New Member

    815
    0
    Kent
    You can also buy the normal motor tab connectors and solder them on in place of the hoops. It's what I'll do personally.
     
  5. Rusty34

    Rusty34 New Member

    158
    0
    Corneria
    Evike sells the wire sets that have the traditional motor clips.
     
  6. Napple

    Napple New Member

    442
    0
    Thanks everyone!! (20characters)