G36c Hmc Build! (My first build)

Discussion in 'Gun Building, Modifications & Repairs' started by BlackDragonAirsoft, Sep 24, 2012.

  1. BlackDragonAirsoft

    BlackDragonAirsoft New Member

    708
    0
    Okay, Got a jg recently, and im gonna upgrade.
    Upgrade list:
    Lonex A1 or A2
    Shs 16:1
    shim job
    aoe
    Modify or echo 1 piston with metal teeth
    same spring for now
    Rewired to deans in the rear
    9.6v Battery
    Madbull 6.03 363mm
    suppressor to cover barrel
    Better hop up unit? (suggestions plz)
    Thats just about it for now, any other ideas?
     
    Last edited: Sep 24, 2012
  2. PistolsAndMP5s

    PistolsAndMP5s New Member

    3,063
    0
    Corona
    High speed build? Or what are you trying to achieve?
     

  3. BlackDragonAirsoft

    BlackDragonAirsoft New Member

    708
    0
    Its gonna be a cqb high rps build. Id eventually like some help with installation when i get the parts.
     
  4. MrGoodkat

    MrGoodkat New Member

    1,290
    0
    Get a better bucking not a new hop up unit.
     
  5. Pezturbator

    Pezturbator New Member

    1,584
    0
    Get a back.up.spring just in case
     
  6. BlackDragonAirsoft

    BlackDragonAirsoft New Member

    708
    0
    Ok, thanks. Any reccomendations?
     
  7. BlackDragonAirsoft

    BlackDragonAirsoft New Member

    708
    0
    Sorry, double post.
    Yeah, probably smart, i could get a higher power one for feild.
     
  8. Pezturbator

    Pezturbator New Member

    1,584
    0
    If bravo.makes a v3 hop.up.unit I think that would work.
     
  9. BlackDragonAirsoft

    BlackDragonAirsoft New Member

    708
    0
    Probably, ill look around on the webs.
     
  10. PistolsAndMP5s

    PistolsAndMP5s New Member

    3,063
    0
    Corona
    Get 13:1 gears instead of 16:1.
    Also lonex red motors are great.
     
  11. BlackDragonAirsoft

    BlackDragonAirsoft New Member

    708
    0
    Ok, do you think that piston can take it? Thats gonna be 30rps+
     
  12. PistolsAndMP5s

    PistolsAndMP5s New Member

    3,063
    0
    Corona
    Yes. Modify makes great pistons. Lonex and Bravo sell great pistons too.
     
  13. BlackDragonAirsoft

    BlackDragonAirsoft New Member

    708
    0
    Ok, thats good. I cant imagine an 11.1v lolol
     
  14. MrGoodkat

    MrGoodkat New Member

    1,290
    0
    I will say this again, you don't need a new hop-up get a new bucking.

    As for suggestions...

    Age says: Madbull, Systema, or G&G Green

    DM says: Guarder Clear

    I would try one of those^
     
  15. BlackDragonAirsoft

    BlackDragonAirsoft New Member

    708
    0
    Ok, sounds good to me, ill look at which one i like best
     
  16. BlackDragonAirsoft

    BlackDragonAirsoft New Member

    708
    0
    Where would be the best place to purchase my goodies from? id like to get it all from one retailer...
     
  17. Pezturbator

    Pezturbator New Member

    1,584
    0
    Clandestine airsoft, airsoft extreme
     
  18. BlackDragonAirsoft

    BlackDragonAirsoft New Member

    708
    0
    What length motor does a g36 normally take? And what other motors are good other than lonexs?
     
  19. ld513

    ld513 New Member

    1,836
    0
    Cincinnati
    A G36 uses a V3 mechbox. These have a short motor. Other good options are really most chinese neo motors. TX is about the best on the market. And another widely promoted bucking is the PDI W-hold.