G36C Upgrading

Discussion in 'Electric Guns' started by fragger, Dec 30, 2012.

  1. fragger

    fragger New Member

    Hi,i would like to upgrade my JG G36C and achieve 125~130m/s i have chosen these parts:
    Spring for AEG SP 120 [Guarder] http://www.ebay.co.uk/itm/Guarder-AEG-Airsoft-upgrade-Spring-120-/270791956646
    Military Action Stainless Steel Spring Guide for Ver3 http://www.airsoftpark.com/military-action-stainless-steel-spring-guide-ver3-p-310.html
    Element 7mm Steel Ball Bearing Bushing http://www.airsoftpark.com/element-steel-ball-bearing-bushing-p-9533.html
    Energy 7 Teeth PolyCarbonate Piston Black http://www.airsoftpark.com/energy-teeth-polycarbonate-piston-black-p-2827.html
    Military Action Aluminum Ventilation Piston Head Silver http://www.airsoftpark.com/military-action-aluminum-ventilation-piston-head-silver-p-10643.html
    Guarder Hop Up Rubber http://airsoftas.lt/Aksesuarai/Atsargines_dalys/Gumelė_Hop-Up_permatoma
    But i don't know which cylinder head will fit ? Is this good? http://www.airsoftpark.com/element-aluminum-cylinder-head-gearbox-blue-p-9836.html
    Is everything good with this build or should i change something?
    Last edited: Dec 30, 2012
  2. Lefse

    Lefse Well-Known Member Supporting Member

    Replace all items in your list with Lonex, Guarder or SHS parts and you're good to go. Don't use 7mm ball bearings, they're too fragile, especially cheap ones. I use Element oil-less steel bushings in most of my builds, they are cheap, they've fit snugly in all my GB's so far, and I haven't had any issues with them. If you want something a bit fancies you can get Modify bushings, they're higher quality, but are quite expensive.